Embedded Systems Conference
Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 2 / 3   >   >>
marcucci
User Rank
Author
Re: Poor design
marcucci   12/12/2013 8:26:51 AM
NO RATINGS
I have not, and I can say our tree has 850 lights on it and is RIGHT next to our entertainment center and LCD TV.

MeasurementBlues
User Rank
Author
Re: Poor design
MeasurementBlues   12/9/2013 5:02:01 PM
NO RATINGS
@marcucci, have you seen any EMI problems with the LED lights?

Duane Benson
User Rank
Author
Re: Poor design
Duane Benson   12/9/2013 4:07:44 PM
NO RATINGS
Most of the light strings I own came with a spare fuse and a few spare bulbs. The challenge is in finding those spares if and when needed. I do agree, however, that at such a low price, they really are disposable.

If I question a particular string for any reasn, I tend to throw it out. Given the price point, I have to assume that every part of the string is made as cheaply as possible and I'd rather not risk a fire than save a few bucks.

Rcurl
User Rank
Author
Re: Poor design
Rcurl   12/9/2013 1:33:50 PM
NO RATINGS
A couple of years ago I bought a bunch of strings of LED Christmas lights to go along the 200 foot fence in front of our house, thinking that this would be a one-time investment. Boy- was I ever wrong.  The LED's didn't fail but the sockets did. All the lights got donated to the Thrift Store just after Christmas. During the after-Christmas sales last year I ended up buying some "commercial grade" LED lights that were permanently attached to the string (no connectors!) and had a 5 little volt switching supply for each string. They've been up since Thanksgiving, and so far there are no failures (knock on wood).  

gah4
User Rank
Author
Re: Poor design
gah4   12/6/2013 7:50:25 PM
NO RATINGS
Is a full wave rectifier enough to remove the flicker?  One could add a filter capacitor, or use a nice regulated laboratory supply. LEDs usually want a current regulated supply, though, and I don't know how they actually do it.

amacon
User Rank
Author
LED lights
amacon   12/6/2013 2:42:51 PM
NO RATINGS
We have also really enjoyed our LED strings except that the X10 modules we use to time all the various trees and outdoor lights don't detect them and think they need to turn off - it took us a while to figure out it was the X10, not the LED strings.  We had to return to old fashioned timers.

marcucci
User Rank
Author
Re: Poor design
marcucci   12/6/2013 12:32:04 AM
NO RATINGS
I finally made the switch this year to LED bulbs. I bought the EcoSmart brand from Home Depot. They are indoor/outdoor rated, flicker-free (I assume full-wave rectified), and the one-light-doesn't-take-out-the-whole-strand variety. I'm extremely pleased with them so far. They also seem to have thought out the connector a little better, as they utilize a pair of round female pins to accept the LED lead that's folded over against a plastic pin. I have found a few sloppy female contacts but they are definitely better than the traditional ones.

EngiGuy
User Rank
Author
Re: Poor design
EngiGuy   12/5/2013 6:11:08 PM
NO RATINGS
I generally wait until January to buy lights for next year - i picked up about 100 boxes of lights for about 50 cents each (Big Lots was it?). 

MeasurementBlues
User Rank
Author
Re: Poor design
MeasurementBlues   12/5/2013 4:52:23 PM
NO RATINGS
Sometimes it's the challenge fo fixing things yourself. Sometimes it's about saving money. I had two recent experiences. Of the car alarm, I chose to pay a small amount rather than spend house tracing wires.

Sirens gone wild, inside and out

Brian.Lien
User Rank
Author
Low voltage detector
Brian.Lien   12/5/2013 11:31:42 AM
NO RATINGS
If you're simply up for the challenge, this is the best tool on the planet for finding dead bulbs in your XMas light strands:

 

http://www.greenlee.com/products/DETECTOR%2540c-VOLTAGE-%2540dADJUSTABLE-(GT%2540d16).html?product_id=17647

 

<<   <   Page 2 / 3   >   >>


Most Recent Comments
cd2012
 
junko.yoshida
 
MikeD95101
 
betajet
 
junko.yoshida
 
Bill_Higdon
 
Tom_C
 
R_Colin_Johnson
 
David Ashton
Most Recent Messages
5/27/2015
9:18:32 PM
Radio
LATEST ARCHIVED BROADCAST
Overview: Battle-hardened veterans of the electronics industry have heard of the “connected car” so often that they assume it’s a done deal. But do we really know what it takes to get a car connected and what its future entails? Join EE Times editor Junko Yoshida as she moderates a panel of movers and shakers in the connected car business. Executives from Cisco, Siemens and NXP will share ideas, plans and hopes for connected cars and their future. After the first 30 minutes of the radio show, our listeners will have the opportunity to ask questions via live online chat.
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Special Video Section
LED lighting is an important feature in today’s and future ...
Active balancing of series connected battery stacks exists ...
After a four-year absence, Infineon returns to Mobile World ...
A laptop’s 65-watt adapter can be made 6 times smaller and ...
An industry network should have device and data security at ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...