Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
Victor Lorenzo
User Rank
Rookie
Re: My A-Ha moment
Victor Lorenzo   12/20/2013 2:07:53 AM
NO RATINGS
Well, I suppose this is embarrassing. :(.

Many many years ago I started experimenting with some simple electronic circuits and needed one 9V DC power supply. I already had the transformer and my father gave me a couple of diodes and one electrolytic capacitor. "Piece of cake", I thought.

During first power-up the diode emmited light, the diode I used had a small glass window in the anode lead, "that should be normal, that's what the glass window is for" I thought (again). But after the second power-up, when I was goind to meassure the output voltage the diode exploded.

A-ha! I connected the diode, the transformer and diode... IN PARALLEL! Probably that was the first LED ever ;), at the first for me.

This picture bellow if of those diodes:



ghfarmer
User Rank
Rookie
Re: My A-Ha moment
ghfarmer   12/16/2013 7:57:22 AM
NO RATINGS
You'd still be looking for the problem in Michigan--we don't get that much sun consistently. 

David Ashton
User Rank
Blogger
Re: My A-Ha moment
David Ashton   12/14/2013 4:13:53 AM
NO RATINGS
I also had a weird problem once - intermittent failures / garbled characters on a printer belonging to British Airways in an airport office.  It always worked fine when a tech was there!  Symptoms were like a bad data link, but this was connected with about 15 feet of cable.  Or so we thought.  Eventually I decided to see if the cable had been chewed by rats or something.  What I found was an inline connector in the middle of the cable (original cable was not long enough to reach the 15 feet) hidden behind a desk.  And ants had made a nest in the shells of the 25-way D connectors.  A-HA!  Ants produce formic acid which had obviously caused some partial shorts.  Cleaned the plugs up, put some bits of mothballs inside them and never had another problem.  Moral of story: always expect the unexpected!

edhowland
User Rank
Rookie
My A-Ha moment
edhowland   12/14/2013 1:33:00 AM
NO RATINGS
A number of years ago I was working as a computer field service tech. As many of you probably realize, one of out biggest headaches was intermittant failures that couldn't be duplicated. I began receiving calls every afternoon near quitting time regarding a printer spewing out paper uncontrolably. I would drive to the site, annoying my wife by missing dinner, only to find the problem had vanished and could not be duplicated. The calls continued almost, but not completely, daily. In desperation, I began changing components, beginning with the most likely ones, but no luck. The calls continued to come in nearly every afternoon. Finally, one Monday, I got the same complaint, but an hour earlier than previous. This was my A-Ha moment. Daylight savings time had just ended, The next day I visited the site a bit before the problem had been expeienced and watched the sun, shining through a nearby window illuminate the printer and activate a paper sensing photocell. Drawing the blinds resolved my headache and restored my reputation.

jimfordbroadcom
User Rank
CEO
Re: Wavelets
jimfordbroadcom   12/13/2013 8:26:03 PM
NO RATINGS
Maybe you can explain them to me?  I need a "Wavelets for Dummies" book!

seaEE
User Rank
CEO
Re: if you went to school in the '80s
seaEE   12/13/2013 1:22:46 AM
NO RATINGS
MeasurementBlues, thanks for the tip on how to embed a video.  I did not realize it could be done here.  And I'm glad you liked the video.  It's one of my favorite songs of the 80's, though I have lots of favorites from that decade--there was certainly a mind-boggling abundance of creativity and stellar musicianship and vocal talent.

This thread brings me back to my highschool advanced algebra class.  I had decided to risk taking the accelerated class.  The first week was spent studying groups and fields, which really stretched my mind in a painful way, as I had no prior knowledge of either, nor were they even mentioned in the textbook we were using, and then I got back my first test with the score of a....36 out of 100.  Yikes.  I was pretty demoralized, but it turned out to be a B- on that particular grading curve. Needless to say, there were lots of a-ha moments that year after that first uh-oh.

One of the struggles with any field of study is learning the vocabulary, and why certain vocabulary is chosen to implement certain concepts (like the words permittivity and permeability).  I also use to build Radio Shack projects, and remember as a kid being explained the concept of "ground" but not fully grasping it at the time.  Huh?  Ground?  It's an electronic term?  Some a-ha moments take a little foundation laying, and as they say, learning is a lifelong process!

BrainiacV
User Rank
Rookie
Totally off subject...
BrainiacV   12/12/2013 10:55:33 AM
NO RATINGS
But your comment reminded me of the time I bought a set of cellphones for my spousal-unit and myself.

The salesman offered to show me how to set up my name in the main display. I was in a hurry so I said, "Nah, I'll just RTFM."

The salesman smiled, and smiled, and finally said, "You just made my day."

Obviously I didn't have to explain the acronym to him.

David Ashton
User Rank
Blogger
Re: if you went to school in the '80s
David Ashton   12/11/2013 4:04:57 PM
NO RATINGS
@MB.... "Start with How to Use the New EE Times."

Thanks Martin, the good old RTFM Technique, huh?  I found when I tried I could not even get a graphic into the window, let alone post it, but I will experiment some more and let you know how I go.   Meantime I have to get off to work :-((

MeasurementBlues
User Rank
Blogger
Re: if you went to school in the '80s
MeasurementBlues   12/11/2013 3:04:43 PM
NO RATINGS
@David, Start with How to Use the New EE Times. I can help you with other questions as well. Happy to provide more Ah-ha moments.

David Ashton
User Rank
Blogger
Re: if you went to school in the '80s
David Ashton   12/11/2013 2:44:06 PM
NO RATINGS
@MB - it is a good video.  But tell me, how do you put a picture in a comment.... can you???  I've tried and could not get it to work.  The "Insert Image" icon in the editing screen only lets you insert an image from a URL - if you enter a file and path on your own hard drive it won't work?

Page 1 / 2   >   >>


Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Want a Voltera Desktop PCB Printer?
Max Maxfield
22 comments
I just received an email from my chum Javi in Spain. "Have you heard about Voltera (VolteraInc.com)? It's a Canadian company that is going to offer desktop-size PCB printers for fast ...

Aubrey Kagan

Have You Ever Been Blindsided by Your Own Design?
Aubrey Kagan
37 comments
I recently read GCHQ: The uncensored story of Britain's most sensitive intelligence agency by Richard J. Aldrich. The Government Communication Headquarters (GCHQ), Britain's equivalent of ...

Martin Rowe

No 2014 Punkin Chunkin, What Will You Do?
Martin Rowe
2 comments
American Thanksgiving is next week, and while some people watch (American) football all day, the real competition on TV has become Punkin Chunkin. But there will be no Punkin Chunkin on TV ...

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
15 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...