Hello Blaine, your analysis of the blog is correct.
The title of the Ericsson presentation was " Si-photonics and evolved packaging: A system vendor perspective" and focused on the SYSTEM-level benefits of Silicon-Photonics. Interposers are an important (and currently the most promising) means to reap all the benefits Photonics can offer.
Stephane Lessard did a great job to convey the many system-level reasons for deploying photonics. Several presenters before and after him complemented his message well by outlining interposer benefits and technology readiness from a component perspective.
I hope you are right with your assessment that this technology may very well be in full swing by 2016. My previous work on lengthy component- and system-level qualification efforts with service providers may make me too sceptical in this regard. The significant benefits and competitive pressure may accelerate this transition.
Reading the original blog, the Ericsson quote seems to refer to optical interconnects in general vs. interposer designs or 2.5D or 3D or any other particular route.
Consider there are commercial products at the cable level with bits of Si Photonics in them, and many companies suggesting a lot more products by mid-2014, saying a transition could be in "full swing" (whatever that really means) by 2016 isn't such a huge stretch. If we take that to mean by the end of 2016, that is still 3 full years. If "full swing" means that optical interconnects are taking market share in some areas, that sounds plausible.
Herb, since you were there, can you clarify what you think was meant by the comments? Was this purely an Ericsson perspective, or more general?
May I invite you for an in-depth discussion during a nice dinner or an extended lunch? Of course, my treat! I would like to learn from you how I can better contribute to innovation and also understand your outlook for our industry.
Please give me a few days notice when you tell me when and where we can meet.....Herb
BTW, Xilinx is producing 2.5-D parts with plans for a widening variety of products, admittedly low volume and high price.
Huawei is working with Altera on offerings. Micron has its Hyper Memory Cube sampling. SK Hynix has a similar design. IBM is working with Micron on its own designs and several companies including even the relatively conservative Broadcom are talking about 2.5-D switches with silicon photonics in 2015-16.
@ Rick : this 2.5 / 3d hype nonsense has gone on for far too long. I am ready to take up your earlier challenge to write something up for EE Times. I should be able to cobble something together ( with a dash of Math perhaps ) during the break. If that still makes sense then let us have your e-mail address at EE Times.
seems likely all the recently minted experts and champions of Advanced Packaging technologies like 2.5 d interposers and 3 d die stacking, who had been making wild predictions that every iPhone SoC / GPU amd DRAM would soon come in one of these modules, have finally wised up and shifted their sights to heterogeneous integration ( e,g. electronic to optical ) where the higher costs are more acceptable because there are no good alternatives.
get reaady for another hype cycle by paid shills posing as technologists
I agree with you, your FIRST interposer design will take longer than the SoC route, because you need to make yourself, your company and key people at your customer(s) familiar with this new technology .... That's exactly the reason why many companies quietly are currently developing interposer solutions and why IP vendors like Rambus and Invensas publizise their interposer capabilities now.
The benefits of deploying a new technology the first time are typically not that great, but mastering a new technology and deploying it widely, ahead of the competition, that's how you can get ROI's others can only dream about....
In the mid1990s the big IP-reuse wave in SoC design started and grew, against the voices of many sceptics. Now, 20+ years later, IP reuse of legacy code, even integration of 3rd party IP is possible now and a must use to compete effectively.
The modularity DIE-LEVEL IP brings to 2.5D or 3D-ICs brings, will offer us even bigger advantages, especially in reducing development cost, time and respin risk. Just look at an early example: Xilinx' rapidly growing family of products, combining FPGA die with other functions on an interposer.
Drones are, in essence, flying autonomous vehicles. Pros and cons surrounding drones today might well foreshadow the debate over the development of self-driving cars. In the context of a strongly regulated aviation industry, "self-flying" drones pose a fresh challenge. How safe is it to fly drones in different environments? Should drones be required for visual line of sight – as are piloted airplanes? Join EE Times' Junko Yoshida as she moderates a panel of drone experts.