Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 2 / 2
GarySXT
User Rank
Author
Dev Boards on my workbench
GarySXT   12/23/2013 2:46:24 PM
NO RATINGS
I have used several of the boards you mentioned and plan to eventually get around to a couple mentioned that I don't have yet.  One new one I recently picked up was the Atmel ATSAMD20-XPRO for their new Cortex M0 processor.

I wanted to get some experience with the low end Cortex ARM processors. One thing that really pushed me towards the Atmel board was their free development system. It is based on Visual Studio, which admittedly is a hog but I am familiar with it, and it comes bundled with the GCC compiler already integrated. 

Most of the other development boards require a higher end 3rd party development system that is either time limited, code space limited or cost several $K for the professional version. If I was working on a commercial product I might have gone a different route, but this is a self funded learning project that will probably extend over many months on a time as available basis.  

Kinnar
User Rank
Author
Re: Love the sondtrack!
Kinnar   12/23/2013 2:45:49 PM
NO RATINGS
It is really very diversified varieties of boards covered by one person. Raspberry-Pi and chipkit module combination will be really helpful stuff for armature electronics developers, otherwise if one know embedded system design he can directly program Raspberry-Pi. But overall it is very good video explanation of wide variety of boards.

junko.yoshida
User Rank
Author
Re: Love the sondtrack!
junko.yoshida   12/23/2013 9:36:53 AM
NO RATINGS
Yeah, I've gotta say that I also loved the music intro, plus the enthusiasm of Caleb coming through this video!

David Ashton
User Rank
Author
On your workbench....
David Ashton   12/21/2013 1:33:10 AM
NO RATINGS
As always Caleb I am amazed by the way you seemingly effortlessly jump between platforms.  But it occurs to me that where I would have a few different chips and transistors on my workbench, guys like you now have a few different boards.  Getting an MCU project going from scratch would be a huge undertaking these days, but the boards do most of the donkey work for you.  The effort is now in the programming and interfacing (which is where you excel).  Very nice show.

rick merritt
User Rank
Author
Love the sondtrack!
rick merritt   12/20/2013 7:57:11 PM
NO RATINGS
The music when you reveal the boards was a fun throwback to the 60s! Classy video.

Alas, I have no workbench but look forward to what others share.

<<   <   Page 2 / 2


Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Most Recent Comments
michigan0
 
SteveHarris0
 
realjjj
 
SteveHarris0
 
SteveHarris0
 
VicVat
 
Les_Slater
 
SSDWEM
 
witeken
Most Recent Messages
9/25/2016
4:48:30 PM
michigan0 Sang Kim First, 28nm bulk is in volume manufacturing for several years by the major semiconductor companies but not 28nm FDSOI today yet. Why not? Simply because unlike 28nm bulk the LDD(Lightly Doped Drain) to minimize hot carrier generation can't be implemented in 28nm FDSOI. Furthermore, hot carrier reliability becomes worse with scaling, That is the major reason why 28nm FDSOI is not manufacturable today and will not be. Second, how can you suppress the leakage currents from such ultra short 7nm due to the short channel effects? How thin SOI thickness is required to prevent punch-through of un-dopped 7nm FDSOI? Possibly less than 4nm. Depositing such an ultra thin film less then 4nm filum uniformly and reliably over 12" wafers at the manufacturing line is extremely difficult or not even manufacturable. If not manufacturable, the 7nm FDSOI debate is over!Third, what happens when hot carriers are generated near the drain at normal operation of 7nm FDSOI? Electrons go to the positively biased drain with no harm but where the holes to go? The holes can't go to the substrate because of the thin BOX layer. Some holes may become trapped at the BOX layer causing Vt shift. However, the vast majority of holes drift through the the un-dopped SOI channel toward the N+Source,...
Like Us on Facebook
Special Video Section
Once the base layer of a design has been taped out, making ...
In this short video we show an LED light demo to ...
The LTC2380-24 is a versatile 24-bit SAR ADC that combines ...
In this short video we show an LED light demo to ...
02:46
Wireless Power enables applications where it is difficult ...
07:41
LEDs are being used in current luxury model automotive ...
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...