Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
bunghole12
User Rank
Rookie
Quick turn, Prototype PCB Assembly Services for "Engineers"
bunghole12   5/1/2014 3:05:48 PM
NO RATINGS
Hello,

I work for a "unique" quick turn, prototype pcb assembly company for "Engineers" named Hilltron(www.hilltron.com). Please let me know if you have any "prototype" pcb assembly requirements as I believe you will be impressed by our professional service, quality and eagerness to "earn your business".  Please contact: Tim Yoshikawa, email: tim@hilltron.com or 408-340-0081.

woodsyco
User Rank
Rookie
Used in production!
woodsyco   4/16/2014 1:01:59 PM
NO RATINGS
Hi - great post. Like many around here, I work professionally in technology but electronics is still a hobby / obsession. In my own lab I have many of the same - Arduino, mbed, Beaglebone, as well as Atmel and Freescale ARM devboards. (OK, I work for ARM, so have that bent, but some of thiose retail for just $12-95!) I also have the Xilinx Zedboard and the RedPitaya device - both based on Zynq, that I intend to use one day...

What I have been surprised at is how these boards are being used in production - a little scary, and risky, but just shows how technology is getting democratized. So far removed from my wire-wrapping and veroboard days. (But yes, I still do!)

DrFPGA
User Rank
Blogger
More Please
DrFPGA   1/24/2014 2:22:00 PM
NO RATINGS
Let's have more reviews of dev boards and share experiences (good and bad) in using them. Other engineers experiences are so much more valuable than the 2 page brochure we normally get...

Workshopshed
User Rank
Rookie
Re: On your workbench....
Workshopshed   1/17/2014 3:49:17 PM
NO RATINGS
I've just a couple of boards at the moment, the Arduino Uno which I used for my prototyping work and a Arduino Micro clone which I'm planning to embed into a topsy turvy clock.

I've another Arduino clone on it's way from a Kickstarter project that's taken over a year. That I plan to hook up to an ethernet board so that it can plot temperature and humidity in the workshop.

Robotics Developer
User Rank
Rookie
Re: Love the sondtrack!
Robotics Developer   12/27/2013 4:06:07 PM
NO RATINGS
Rick, I have no workbench but I have a desk, and kitchen counter and a workshop table (double duty as a woodworking, metal working, house repairs, etc..).  Don't let not having a bench stop you from playing!!!  I do not yet have a Raspberry Pi but want to get one, I do have some PIC32s, STMicro dev boards and will look into the BeagleBone Black.  Thanks for the overview of your "stock"!  I would have liked to know about the development board SDK support offereings as well.  It seems most often that it is not the hardware but getting the software enviroment setup that is the challenge.  Were any of the dev boards hard to get the software setup working?  Were any just easy?  Very curious and I am sure others are as well..

 

Wess.Gates
User Rank
Rookie
Made in The USA
Wess.Gates   12/27/2013 3:46:17 PM
NO RATINGS
Interesting about the Red Bull PCB. I am wondering if its just the PCB design that makes it more fun or if they actually added anything new to it? I have a few of the TI dev kits and like you have yet made the time to tinker with them, the Atmel STK500, STK600, Nordic nRFgo Motherboard, many Cypress PSoC flavors (PSoC is my favorite platform from both a technical and personal viewpoint), and I keep a LabJack U6 which I consider more of a development platform rather than a DAQ as it is marketed. 

If you are interested my company is experimenting with a run of "Made in the USA" USAduino boards based on the Uno R3 i.e. a clone but with a silk screen of the US Flag 100% PCB and assembly "Made in the USA" less the components of course. As well as compliance with the Arduino and LUFA terms so it is respectful of the open source spirit unlike the many existing clones. Check out www.edtrication.com if you are curious.  

I agree with poster below:"Do not put yourself down." The results matter far more than the label ever will. 

Cheers,


Wess 

 

emklaus
User Rank
Rookie
On My Workbench...
emklaus   12/27/2013 3:41:44 PM
NO RATINGS
I'm a semi-novice like yourself and found that my go to dev board is simply an ATMega32a (in the 40pin DIP format) plugged into a solderless breadboard. I love the way the I/O pins all the ports are in bit order. I keep a handful of what I call "blinkeys" (an LED with a limiting resistor attached) around and plug them into the ports where needed.

The code is easily ported to smaller ATMega chips or even over to the Arduino.

 

David Ashton
User Rank
Blogger
Re: On your workbench....
David Ashton   12/23/2013 6:20:52 PM
NO RATINGS
@Caleb - don't put yourself down....You've said several times that you are not an engineer (nor am I so I sympathise) but you seem a lot more capable than some engineers I have known.  It's ability that counts.  Have a good Christmas.

Caleb Kraft
User Rank
Blogger
Re: On your workbench....
Caleb Kraft   12/23/2013 3:43:24 PM
NO RATINGS
It is easy for me to jump back and forth because I do EXTREMELY SIMPLE THINGS. I'm usually doing beginner level things, I often just have a nack for presentation that makes it look like maybe it is is more complex than it actually is.

sam512bb
User Rank
Rookie
Freescale Freedom and STM32FDisovery Boards
sam512bb   12/23/2013 3:04:49 PM
NO RATINGS
Good day All,

Freescale and STM offer some pretty slick and inexpensive development boards too.  Freescale has their Freedome boards for just over $12 and the ST's Discovery boards are about the same.  On the software side...Freescale offers their software for free with a reasonable code size limit, and mbed has a free online compiler, downloader, etc that supports a number of these smaller dev boards.

Never before has there been such a plethora of dev boards that cater to so many different skill sets.

 

 

Page 1 / 2   >   >>


Flash Poll
Top Comments of the Week
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Vetinari Clock: Additional Possibilities
Max Maxfield
5 comments
In my previous blog on the topic of my Vetinari Clock project, we pondered a number of possibilities for the positioning of switches on the front panel, and we ended up with a number of ...

Jolt Judges and Andrew Binstock

Jolt Awards: The Best Books
Jolt Judges and Andrew Binstock
1 Comment
As we do every year, Dr. Dobb's recognizes the best books of the last 12 months via the Jolt Awards -- our cycle of product awards given out every two months in each of six categories. No ...

Engineering Investigations

Air Conditioner Falls From Window, Still Works
Engineering Investigations
2 comments
It's autumn in New England. The leaves are turning to red, orange, and gold, my roses are in their second bloom, and it's time to remove the air conditioner from the window. On September ...

David Blaza

The Other Tesla
David Blaza
5 comments
I find myself going to Kickstarter and Indiegogo on a regular basis these days because they have become real innovation marketplaces. As far as I'm concerned, this is where a lot of cool ...