Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 2 / 2
eetcowie
User Rank
Blogger
Re: Comparison Tables?
eetcowie   1/14/2014 9:03:50 PM
NO RATINGS
...comparison tables..

Yes, at the end it will be useful to see it all, so they say. I'll decide a good format as I get closer to the end.

Adam-Taylor
User Rank
Blogger
Specification
Adam-Taylor   1/14/2014 3:33:41 PM
NO RATINGS
A great series of blogs, when it comes to specifying a battery what are the cardinal points of the specification (technology, end of life votage, amp hour etc) that the engineer needs to consider.

 

David Ashton
User Rank
Blogger
SLABs
David Ashton   1/14/2014 3:06:28 PM
NO RATINGS
Hi Ivan....another informative article, thanks.  I know VRLAs as SLABs (Sealed Lead Acid Batteries) which in Australia can be confused with a box holding 24 cans of beer :-)  

Can you explain how the technologies for this overcome the gassing that is usual with the wet-cell types?

And how do the so-called Deep-cycle batteries avoid the sulphation that happens with ordinary batteries if they are deep-discharged?

antedeluvian
User Rank
Blogger
capacity Mesurement
antedeluvian   1/14/2014 1:28:59 PM
NO RATINGS
Recent Brad Albing blogged about a new TI chip that acts as a gas guage for lead-acid batteries. It looked good to an innocent like myself, and I was wondering if you thought the product had any merit. Looking at it, it does seem to need to apply a load to guage the remaining charge, but so much of the topic is new to me that I would like an expert's opinion.

antedeluvian
User Rank
Blogger
Lead Acid Batteries
antedeluvian   1/14/2014 1:22:58 PM
NO RATINGS
As Mark Twain might have said, Everyone would like to get rid of the lead-acid battery, but nobody does!

I have been working on a battery backup unit design for industrial power supplies (24VDC) for 12 years or so. There is an old English joke-

Q: How do you start a pudding race?

A: Say go (ask Max to explain)

The project has not gone anywhere because management has never allocated the resources, but the need remains. Part of the issue of the design is that you need to charge a nominal 24VDC battery with a 24VDC power supply. There are several approaches to this, buit our current proposal is a buck/boost switchmode power supply. Boost for when the battery exceeds 24V and buck for the other case.

Anyway one of the considerations is that in order to test the battery, I am told you need to drain the battery through a load. The problem is that once this test is done, the battery needs to be recharged- what happens if backup is needed during the charge cycle? Do you concur with this concept that lead-acid batteries be regularily load-tested?

 

Duane Benson
User Rank
Blogger
Answered before I asked
Duane Benson   1/14/2014 1:16:51 PM
NO RATINGS
re "Sealed lead-acid technology is sluggish and cannot be charged as quickly as other battery systems" - You just answered a question I've had for quite a long time. This has been a good series.

Batteries are a bit of a mystery but too important to be left as a mystery.

Max The Magnificent
User Rank
Blogger
Comparison Tables?
Max The Magnificent   1/14/2014 11:52:35 AM
NO RATINGS
Hi Ivan -- at the end of this, once you've worked your way through every battery technology known to humankind, will you be presenting an overall comparison matrix showing the various technologies in relation to each other?

<<   <   Page 2 / 2


EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Creating a Vetinari Clock Using Antique Analog Meters
Max Maxfield
Post a comment
As you may recall, the Mighty Hamster (a.k.a. Mike Field) graced my humble office with a visit a couple of weeks ago. (See All Hail the Mighty Hamster.) While he was here, Hamster noticed ...

EDN Staff

11 Summer Vacation Spots for Engineers
EDN Staff
11 comments
This collection of places from technology history, museums, and modern marvels is a roadmap for an engineering adventure that will take you around the world. Here are just a few spots ...

Glen Chenier

Engineers Solve Analog/Digital Problem, Invent Creative Expletives
Glen Chenier
11 comments
- An analog engineer and a digital engineer join forces, use their respective skills, and pull a few bunnies out of a hat to troubleshoot a system with which they are completely ...

Larry Desjardin

Engineers Should Study Finance: 5 Reasons Why
Larry Desjardin
45 comments
I'm a big proponent of engineers learning financial basics. Why? Because engineers are making decisions all the time, in multiple ways. Having a good financial understanding guides these ...

Flash Poll
Top Comments of the Week
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)