Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 2 / 2
eetcowie
User Rank
Blogger
Re: Comparison Tables?
eetcowie   1/14/2014 9:03:50 PM
NO RATINGS
...comparison tables..

Yes, at the end it will be useful to see it all, so they say. I'll decide a good format as I get closer to the end.

Adam-Taylor
User Rank
Blogger
Specification
Adam-Taylor   1/14/2014 3:33:41 PM
NO RATINGS
A great series of blogs, when it comes to specifying a battery what are the cardinal points of the specification (technology, end of life votage, amp hour etc) that the engineer needs to consider.

 

David Ashton
User Rank
Blogger
SLABs
David Ashton   1/14/2014 3:06:28 PM
NO RATINGS
Hi Ivan....another informative article, thanks.  I know VRLAs as SLABs (Sealed Lead Acid Batteries) which in Australia can be confused with a box holding 24 cans of beer :-)  

Can you explain how the technologies for this overcome the gassing that is usual with the wet-cell types?

And how do the so-called Deep-cycle batteries avoid the sulphation that happens with ordinary batteries if they are deep-discharged?

antedeluvian
User Rank
Blogger
capacity Mesurement
antedeluvian   1/14/2014 1:28:59 PM
NO RATINGS
Recent Brad Albing blogged about a new TI chip that acts as a gas guage for lead-acid batteries. It looked good to an innocent like myself, and I was wondering if you thought the product had any merit. Looking at it, it does seem to need to apply a load to guage the remaining charge, but so much of the topic is new to me that I would like an expert's opinion.

antedeluvian
User Rank
Blogger
Lead Acid Batteries
antedeluvian   1/14/2014 1:22:58 PM
NO RATINGS
As Mark Twain might have said, Everyone would like to get rid of the lead-acid battery, but nobody does!

I have been working on a battery backup unit design for industrial power supplies (24VDC) for 12 years or so. There is an old English joke-

Q: How do you start a pudding race?

A: Say go (ask Max to explain)

The project has not gone anywhere because management has never allocated the resources, but the need remains. Part of the issue of the design is that you need to charge a nominal 24VDC battery with a 24VDC power supply. There are several approaches to this, buit our current proposal is a buck/boost switchmode power supply. Boost for when the battery exceeds 24V and buck for the other case.

Anyway one of the considerations is that in order to test the battery, I am told you need to drain the battery through a load. The problem is that once this test is done, the battery needs to be recharged- what happens if backup is needed during the charge cycle? Do you concur with this concept that lead-acid batteries be regularily load-tested?

 

Duane Benson
User Rank
Blogger
Answered before I asked
Duane Benson   1/14/2014 1:16:51 PM
NO RATINGS
re "Sealed lead-acid technology is sluggish and cannot be charged as quickly as other battery systems" - You just answered a question I've had for quite a long time. This has been a good series.

Batteries are a bit of a mystery but too important to be left as a mystery.

Max The Magnificent
User Rank
Blogger
Comparison Tables?
Max The Magnificent   1/14/2014 11:52:35 AM
NO RATINGS
Hi Ivan -- at the end of this, once you've worked your way through every battery technology known to humankind, will you be presenting an overall comparison matrix showing the various technologies in relation to each other?

<<   <   Page 2 / 2


Flash Poll
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

MSGEQ7-Based DIY Audio Spectrum Analyzer: Testing
Max Maxfield
11 comments
In my previous column on this topic, we discussed the step-by-step construction of the first pass at a MSGEQ7-based DIY audio spectrum analyzer for use in my BADASS Display project. Of ...

Karen Field

June 2014 Cartoon Caption Winner
Karen Field
13 comments
Congratulations to "Wnderer" for submitting the winning caption for our June cartoon, after much heated conversation by our judges, given the plethora of great entries.

Jeremy Cook

Inspection Rejection: Why More Is Less in a Vision System
Jeremy Cook
3 comments
Albert Einstein has been quoted as saying, "Everything should be as simple as possible, but not simpler." I would never claim to have his level of insight -- or such an awesome head of ...

Jeremy Cook

Machine Fixes That Made Me Go 'DUH!'
Jeremy Cook
21 comments
As you can see in my bio at the end of this article, I work as a manufacturing engineer. One of my favorite things that happens on a Friday late in the afternoon is to hear my phone ring ...

Top Comments of the Week
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)