Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
CTHP
User Rank
Rookie
Re: Idea on increasing refresh rate
CTHP   1/31/2014 3:39:05 PM
NO RATINGS
CRT, LCD, Plasma, LED, OLED ... new ideas have to start somewhere; a good effort. The material used in this prototype has bulk characteristics and the slow refresh rate is expected. A little materials science and a new thermochromic formula might result in a nano-particle material that will respond faster to changes in applied thermal energy.

David Ashton
User Rank
Blogger
Re: Sell yourself better, guys....
David Ashton   1/30/2014 6:31:12 PM
NO RATINGS
I'm not a pro, Caleb, just done a bit of photography,  and I was trying to be constructive....just if I was trying to push something, I'd aim for a bit better than this....

David Ashton
User Rank
Blogger
Re: Idea on increasing refresh rate
David Ashton   1/30/2014 6:28:43 PM
NO RATINGS
HI Caleb.  Yeah, I don't think it would be worth the effort either.  Peltier might be worth a try but I don't know if you can get them that small.    Thinks - since the thermochromic stuff does different colours, maybe you could make a colour dispolay by using different drive levels.....

Caleb Kraft
User Rank
Blogger
Re: Idea on increasing refresh rate
Caleb Kraft   1/30/2014 6:07:51 PM
NO RATINGS
compressed air would work, but I suspect it wasn't really worth the effort to him. He may have gained a second on the refresh rate, but maybe he didn't want it that bad?

Caleb Kraft
User Rank
Blogger
Re: Sell yourself better, guys....
Caleb Kraft   1/30/2014 6:06:48 PM
NO RATINGS
Hey, not everyone is a pro!

David Ashton
User Rank
Blogger
Sell yourself better, guys....
David Ashton   1/30/2014 5:12:58 PM
NO RATINGS
The video is pretty amateurish and does not do this great idea justice. Use a tripod to keep the camera still, and sort out your lighting to minimise reflections (with a curved surface like this, use side lighting).   And show us how fast it can change.

David Ashton
User Rank
Blogger
Re: Idea on increasing refresh rate
David Ashton   1/30/2014 5:05:47 PM
NO RATINGS
@Templar...good idea, but that needs consumables - bad news.  You might be able to just use compressed air though.   I was thinking miniature peltier modules - use a lot of them to make segments or a dot matrix.  Depending how you drive them they will heat or cool.   You'd probably only have to cool temporarily to erase,  but to display you'd have to keep current flowing - but then you do at the moment with the NiChrome wire.

I doubt this will be a game-changing display technology but it could take off for aesthetic reasons - it is quite pretty....

templar781
User Rank
Rookie
Idea on increasing refresh rate
templar781   1/30/2014 4:47:38 PM
NO RATINGS
When I read that the refresh rate was slow a thought popped into my head on how to possibly speed it up.  Could a micro-miniature solenoid valve be used to dispense cold spray to the rear of the display?  The -60F cold spray should take only milliseconds to essentially "erase" the heat generated character. 

The valve could be controlled by the Arduino that's driving the heating coils, and with a little adjustment to direction, spread, and duration it may be able to dispense the cold spray so that the "erase" mode gets to be very precise as far as timing and perhaps even location is concerned.



Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Recommended Reads From the Engineer's Bookshelf
Max Maxfield
2 comments
I'm not sure if I read more than most folks or not, but I do I know that I spend quite a lot of time reading. I hate to be idle, so I always have a book or two somewhere about my person -- ...

Aubrey Kagan

Have You Ever Been Blindsided by Your Own Design?
Aubrey Kagan
37 comments
I recently read GCHQ: The uncensored story of Britain's most sensitive intelligence agency by Richard J. Aldrich. The Government Communication Headquarters (GCHQ), Britain's equivalent of ...

Martin Rowe

No 2014 Punkin Chunkin, What Will You Do?
Martin Rowe
2 comments
American Thanksgiving is next week, and while some people watch (American) football all day, the real competition on TV has become Punkin Chunkin. But there will be no Punkin Chunkin on TV ...

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
15 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...