Have fun at OFC then, used to go to that trade show...and yes, I rememebr John D/Ambrosia starting 100G efforts 10 years ago...I am just curious what is teh state-of-the-art of this technlogy, used to be very power hungry...if anyone else is interested in giving a talk on this topic feel free to ping me...Kris
@krisi, most of those data streams use 66b/64b encoding and some may use 128b/127b. There was a lot of talk about using forward error correction, particularly where these serial buses might carry data-storage protocols. For example, SATA protocols riding on PCI3 GEN 3 physical layer.
100G Started as 1x10G and now is 2x25G. Well, 4x28G because of bit overhead. Most of the talk at DesignCon is per lane rather than aggregate. The major issue with aggregating is channel-to-channel crosstalk. Most of the issues are just simple getting 26G and 32G to run reliably, All kinds of issues come up such as insertion loss, reflections, intersymbol interference, and skew. At these speeds, differential pairs mismatched by even 1mm have skew prodlems.
What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.