Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
Etmax
User Rank
Rookie
Re: Oh good! An opportunity to vent about 4 cylinder engines.
Etmax   2/5/2014 10:10:58 PM
NO RATINGS
Bert, I was actually comparing the weight difference between a 2.3l 4cyl as used in the Mustang and a 4-5l V6/V8 as used in your typical muscle car of similar power, for the puposes of highlighting where the meagre saving would come from. Sorry for not having been clearer. I agree for same displacement there shouldn't be much weight difference.

I too prefer a 6Cyl to a 4Cyl, but the running gear friction/losses in a 4 is lower resulting in better efficiency.

Of course the fewer cylinders the lumpier.

I referenced the Porsche experience because you made mention of all powerful engines being.. can't remember the term but perhaps I misunderstood as we seem to be on the same page.

Bert22306
User Rank
CEO
Re: Oh good! An opportunity to vent about 4 cylinder engines.
Bert22306   2/5/2014 8:21:34 PM
NO RATINGS
Just on the by n by a friend of mine let me drive his 400hp Porsche for a bit, and there was nothing buzzy about it. Sure it was a flat 6 but it only roared under powerful acceleration.

Obviously, It was a flat 6, not a four.

I once owned a 1.4 liter DOHC Fiat 124 Sport. The small engine displacement made that a smooth engine too, although it did have the odd hiccups you get from 4 cylinder engines at very low revs. My point is, fours are still fours, no matter whether you show on paper that the power output is high. They are not refined-sounding or refined-feeling. The extra drag of two more cylinders I'll gladly pay for, if given an option.

As to engine weight comparisons, here, surprise yourself:

http://www.gomog.com/allmorgan/engineweights2.html

Modern V-6s weigh about the same as a four of similar displacement. So, make some small displacement V-6s!

Etmax
User Rank
Rookie
Re: Oh good! An opportunity to vent about 4 cylinder engines.
Etmax   2/5/2014 8:04:42 PM
NO RATINGS
Absolutely, a 4 cylinder has less friction points than a 6Cyl or 8cyl and a 2.3l has much less weight than a 5l or more all which contribute to economy improvements, but ultimately 300hp is going to the wheels and has to come from somewhere.

Maybe they gain 3% from having a 4cyl and another 5% from the weight savings but the thing will still be a guzzler when the petal is to the metal.

But as far as Mustangs goes, it won't be a muscle car with a 100hp motor of any type.

We just have to accept that a Mustang owner has more money than environmental responsibility.

Just on the by n by a friend of mine let me drive his 400hp Porsche for a bit, and there was nothing buzzy about it. Sure it was a flat 6 but it only roared under powerful acceleration.

Bert22306
User Rank
CEO
Oh good! An opportunity to vent about 4 cylinder engines.
Bert22306   2/4/2014 4:58:13 PM
NO RATINGS
Automakers, all of them, need to appreciate that the more fuel and air they cram into a four cylinder engine, to get the power and torque numbers of a larger displacement 6 or 8 cylinder engine, the more the effect will be the same as a large displacement 4-banger. Even with balance shafts, that translates to a buzzy and unrefined four-banger. I've tried any number of brands, which received any number of accolades in magazine articles. This remains the case.

Please, automakers, at least as an option, please develop some small displacement, turbocharged or supercharged (if need be), 60 degree V-6s. Say, how about some sweet 2 liter V-6s? (And I say V-6 only because straight sixes are heavier and not easily applied to transverse-mounting for front wheel drive. Otherwise, the straight six is hard to beat for refinement.) As far as I'm concerned, any naturally aspirated four that displaces more than 1.5 or 1.6 liters will end up being buzzy. Two liters are simply too many, for a 4-cylinder. Let alone a turbo or supercharged four.

Yes, perhaps on the dyno, the 6-cylinder won't quite get the same fuel economy as a four with equivalent power. Perhaps. But I would ge glad to pay the extra fee for the 6-cylinder anyway.

Lancia had some wonderful small-displacement V-6s way back in the early 1960s. Surely, we can resurrect that formula? Any 300-HP four-banger will feel rough and rude, no matter the hype.



Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Carlos Bueno

Adventures in Userland
Carlos Bueno
Post a comment
Editor’s Note: Excerpted from Lauren Ipsum: A Story About Computer Science and Other Improbable Things, author Carlos Bueno introduces us to Lauren and her adventures in Userland. ...

Max Maxfield

Tired Old iPad 2 vs. Shiny New iPad Air 2
Max Maxfield
9 comments
I remember when the first iPad came out deep in the mists of time we used to call 2010. Actually, that's only four years ago, but it seems like a lifetime away -- I mean; can you remember ...

Martin Rowe

Make This Engineering Museum a Reality
Martin Rowe
Post a comment
Vincent Valentine is a man on a mission. He wants to make the first house to ever have a telephone into a telephone museum. Without help, it may not happen.

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
16 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...