Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 3   >   >>
David Ashton
User Rank
Blogger
Re: Bosch MEMS sensor - air pressure and SI units
David Ashton   2/13/2014 5:15:10 PM
NO RATINGS
@DrQuine....I didn't know about buildings being pressurised.  As you say there are ways round this but the easiest thing is probably to find an elevator and see what floor you are on :-)

DrQuine
User Rank
CEO
Re: Bosch MEMS sensor - air pressure and SI units
DrQuine   2/13/2014 4:58:32 PM
NO RATINGS
Thanks for the "QNH" aviation explanation.  Certainly the same approach could work for SmartPhones: the GPS would provide a location and the nearest reference barometer could provide the correction factor.  The one remaining issue would be the pressure differential inside the building.  Many buildings run at positive pressure which would cause the "altimeter" to read a lower floor level than it should (denser air). Perhaps a simpler approach would be for the GPS to detect entry into the building perimeter, use the indoor ground level air pressure as the barometric pressure reference. It could then compute floor levels by the associated pressure reductions as the air pressure reduced with increasing altitude.

Susan Rambo
User Rank
Blogger
Re: Smart"phone" has now become a misnomer
Susan Rambo   2/13/2014 6:18:52 AM
NO RATINGS
Hi prabhakar_deosthali: Yes it's like the smartphone is really a tricorder and communicator put into one. Even Star Trek didn't think of that one.

Susan Rambo
User Rank
Blogger
Re: Bosch MEMS sensor - air pressure and SI units
Susan Rambo   2/13/2014 6:14:02 AM
NO RATINGS
Yikes. Sounds like altimeter designers are under a lot of pressure. (Bad pun I know.)

Susan Rambo
User Rank
Blogger
Re: Bosch MEMS sensor - air pressure and SI units
Susan Rambo   2/13/2014 6:07:36 AM
NO RATINGS
Thanks. Yes I was disappointed when I found out an altimeter is really just a barometer with more math. (In other words, you subtract the local weather conditions.) Once I wanted a fancy watch with an altimeter on it for hiking but when I found out the altimeter was just a barometer, I decided it was just a toy (for my purposes). An altimeter wasn't going to keep me from getting lost.

David Ashton
User Rank
Blogger
Re: Bosch MEMS sensor - air pressure and SI units
David Ashton   2/12/2014 6:45:26 PM
NO RATINGS
The same problem applies to aircraft altimeters - the pilot gets a "QNH" (I think) figure which is the sea level pressure at his location, puts it in and the altimeter is accurate.   So all you need is some way of (preferably automatically) telling the phone the QNH and it should be accurate...

DrQuine
User Rank
CEO
Re: Bosch MEMS sensor - air pressure and SI units
DrQuine   2/12/2014 6:04:52 PM
NO RATINGS
The sensor claims to be able to read your barometric pressure altitude within 3 feet (which would define the floor of a building). The challenge is that is needs to adjust for weather related pressure changes which could cause the readings to be off by 30 floors...

DrQuine
User Rank
CEO
Re: Temperature and Humdity Sensor in a Smartphone
DrQuine   2/12/2014 6:01:15 PM
NO RATINGS
Sounds like we need remote bluetooth temperature sensors for the iPhone - we care about the temperature outdoors as we drive, not in our pocket where the phone is resting. Maybe some of our car sensors can grant read-only access to our SmartPhones.

Susan Rambo
User Rank
Blogger
Re: Bosch MEMS sensor - air pressure and SI units
Susan Rambo   2/12/2014 11:56:27 AM
NO RATINGS
@DrQuine: "It also provides an interesting object lesson in atmospheric pressure in SI units."  Interesting! Thanks Dr. Quine. So what you're saying is the Bosch MEMS sensor can measure such small pressure changes that it can tell if you're on the 4th floor or the 30th floor and not be affected by general pressure changes in or outside building (weather, HVAC)?

Susan Rambo
User Rank
Blogger
Re: Temperature and Humdity Sensor in a Smartphone
Susan Rambo   2/12/2014 11:44:19 AM
NO RATINGS
That's a good point. Users of smartphones will become more savvy to all the sensors and know how to get a more accurate reading.

Page 1 / 3   >   >>


Most Recent Comments
Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Want a Voltera Desktop PCB Printer?
Max Maxfield
9 comments
I just received an email from my chum Javi in Spain. "Have you heard about Voltera (VolteraInc.com)? It's a Canadian company that is going to offer desktop-size PCB printers for fast ...

Aubrey Kagan

Have You Ever Been Blindsided by Your Own Design?
Aubrey Kagan
37 comments
I recently read GCHQ: The uncensored story of Britain's most sensitive intelligence agency by Richard J. Aldrich. The Government Communication Headquarters (GCHQ), Britain's equivalent of ...

Martin Rowe

No 2014 Punkin Chunkin, What Will You Do?
Martin Rowe
2 comments
American Thanksgiving is next week, and while some people watch (American) football all day, the real competition on TV has become Punkin Chunkin. But there will be no Punkin Chunkin on TV ...

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
15 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...