Here is something that may be interesting to some.
I have acquired a pile of Motorola EVO 4G lapdocks off Ebay recently, and I wanted to do something "cute" with them.
This project is an adapter that directly fits in the place where the EVO 4G handset would go, but breaks out the HDMI and USB connections to a Raspberry Pi.
The switching circuit part of this is so that I don't turn off the Pi by just removing the USB cable. The Micro type B connector is the most abused in consumer electronics today. The cute part of this is the turn-on for the pass MOSFET is very quick, but the turn-off requires a solid button press of 3 seconds.
I am using the automotive form of the dual MOSFET here as I know that people are starting to have a *lot* of extra goodness of their Pi's, and I wanted to be able to support that.
Hi Max: Great to see that live chat is back on the system.
Crusty will try to be on line.
Have at last got rid of the builders, who have engineered a new roof and cleared the window leaks. Rain still falling but have managed to divert the water around the Mansion and stop it coming in to the rooms.
The Crusty Mansion has been redecorated and the Attic workshop has been refurbished. It seems like I might even get time to write some blogs as well.
If you do a Kickstarter for the new Arduino screw terminal board I will definitly back the effort.
What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.