...As coincidence would have it I had to move a stationery cupboard yesterday to make room for an equipment cabinet and inside the cupboard I found a bottle of Rotring drawing ink. Now if I can find my pens I can get the machine working properly (previously tried it with a small felt tip pen).
David, maybe, we should pool resources, then! :-) As a coincidence of my very own, last week, I was looking for something and found 2 of those Rotring pens shown on slide 2, at the back of a drawer. Well, maybe not quite. I think my ones are the "cheapy" versions of the isograph, still available in various line widths but intended for everyday use, when a normal pen just won't do!
Thanks for the post. This really does bring me back memories. In my family there are (or sadly, were) 3 generations of Rotring users, in the architectural and electronics fields. But, as computers took hold in CAD, all the Rotring paraphernalia slowly fell into disuse. But, as nostalgic as I get, I wouldn't like going back to the old days...
No, some of the classic pen and mechanical pencil models have been dropped -- and seen their prices skyrocket on eBay. I don't remember which models in particular (not a rOtring fan, just saw the blog posts in passing).
I just looked into my drawer- the ink (Rotring NC 600 FP) (waterfproof india ink) still seems fine. I see I also have MArs-Staedler drawing ink and some other no-name brand. I don't rememebr but maybe some inks gave better results than others.
I just found another tool that I forgot about to get the ink flowing. Essentially it is a suction ball- a hollow red rubber ball with a plastic nozzle that fits over the pen tip. Squeeze it, apply to tip and release and hopefully the ink would start flowing.
Just did a bit of thinking. Combine these two ideas. Get a UV LED with a finely focussed spot. Use it to expose photosensitive PCB. You'd have to get into the innards to drive the stepper motors directly from a PC or suchlike, then you'd have to write a driver for it......I think that one is going to stay in the "too hard" basket.....
"Most pen addicts seem to feel that after the acquisition, many of the best rOtring products were dropped. "
Certainly most of the stencils and tech drawing stuff has been dropped but I guess that is more due to lack of demand than anything else. They still seem to do most of the pens, but I only ever used a very small sample of their products. As you say, they are pretty expensive now.
I believe rOtring is now part of Newell Rubbermaid, which owns a bunch of pen companies including Sanford, Sharpie, and Parker. Sanford distributes Uniball in the US, but Uniball is really the Mitsubishi Pencil Company (not related to the conglomorate). IMHO Parker hasn't made an innovative pen in about 30 years, although Sharpie continues to innovate (e.g. Sharpie Pen, although I'd take the Staedtler triplus fineliner over it).
Most pen addicts seem to feel that after the acquisition, many of the best rOtring products were dropped. I don't know, since rOtring is too pricey for my pocket.
And, yes, technical pens have migrated to the artistic set, but are still available, with the disposable models (such as the widely available Sakura Pigma Micron) probably being the most popular.
@Antedeluvian - an A3 plotter - that would have been a beast! That would have been pushing the pens to the maximum. Agree about the need to keep the pens clean - if you left them even overnight with ink in they would dry out and take you a LOT more time to clean out. I used to leave the ink in the reservoir, clean the nib and store them upside down so the ink didn't get back in to the nib. How many board layers did you do - a multilayer board would ahve taken days to plot?
What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.