Breaking News
Comments
krisi
User Rank
Author
4.5%
krisi   3/4/2014 4:15:57 PM
NO RATINGS
4.5% increase sound pretty steep...NXP might just elect to close the fab and move it somewhere else...I am actually amazed there is still a fab in Netherlands

lidation
User Rank
Author
Re: 4.5%
lidation   3/4/2014 6:39:54 PM
NO RATINGS
Yup! These workers are digging their own graves. They are already overpaid for what they output compared to the Asians. Asking more will only accelerate the decision from upper management to move the fabs to Asia.

DrQuine
User Rank
Author
Re: 4.5%
DrQuine   3/4/2014 6:46:24 PM
NO RATINGS
Labor issues in fabs present an interesting issue. The costs of the facilities are so staggering that the owners are not likely to close or pick up and move. At the same time, fab technologies become obsolete on a regular basis.  I'd guess that the owners would think twice about continuing operations in a "hostile" work environment when it came time to upgrade to the next generation of technology. Sounds like labor actions in fabs are likely to produce Pyrrhic victories.


krisi
User Rank
Author
Re: 4.5%
krisi   3/4/2014 7:18:42 PM
NO RATINGS
These tactics play well in environment where you can't go elsewhere for a product or service...in Vancouver, Canada where I live teachers routinely get what they want because there is no other way to provide education...as a result the teachers here have the best security in the world and very high compensation with wonderful benefits...Kris

Susan Rambo
User Rank
Author
Re: 4.5%
Susan Rambo   3/4/2014 10:41:54 PM
NO RATINGS
1 saves
You don't think it's a matter of time before the wages go up in Asia, too?

krisi
User Rank
Author
Re: 4.5%
krisi   3/4/2014 10:52:58 PM
NO RATINGS
It wil take at least several years Susan...just look how many people are in Asia compared to Europe...by then all silicon fabs will be out of Europe...unless EU wakens up and funds European foundry consortium due to its strategic importance (like Airbus for planes)

lidation
User Rank
Author
Re: 4.5%
lidation   3/5/2014 8:39:07 PM
NO RATINGS
I've been to several foundries in Korea and Taiwan. The engineers work really hard. Their working hours will be criminal in Europe due to their tight labor laws. And these engineers are very highly educated too. I don't see how the Europeans got any chances in the foundry business unless they go for some disruptive technologies. (ASML is one very good example.)

krisi
User Rank
Author
Re: 4.5%
krisi   3/6/2014 9:50:03 AM
NO RATINGS
I agree...the only chance they have is thru the goverment support...this is a strategic sector for the economy



Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...