Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 2 / 3   >   >>
Navelpluis
User Rank
CEO
Re: But the icons….
Navelpluis   3/16/2014 8:24:54 AM
NO RATINGS
MeasurementBlues,

USB is too many layers, too much of which is unknown to the user. Too many brands do not comply to the agreements, often it is implemented very badly and last but not least: My own experience.

Do yourself a favour and try the following. Get an USB analyzer. Get 2 computers and a bunch of USB devices. 1 computer is a Windoze PC and the other Linux or MAC. Now try out the different devices, and show the screen what it all does. it is HORRIFIC. What a piece of crap most devices are. Even HIT-devices are not always implemented properly, what a shame. Even a hobbyist does it better. Trying things out on linux or MAC show you a ilttle less traffic, but even then I would not dare to use it long-term stand-alone.

 

MeasurementBlues
User Rank
Blogger
Re: But the icons….
MeasurementBlues   3/16/2014 1:33:50 AM
NO RATINGS
What do you base your conclusion on here?

"In field use USB absolutely is not stable enough to do long term measurement jobs"

MeasurementBlues
User Rank
Blogger
Re: Touch screen scopes.......blah
MeasurementBlues   3/16/2014 1:31:42 AM
NO RATINGS
@JRAS, touch screen controls are only imprecise until you get used to them. The change in the usual 1/2/5 increments, just like a knob.

"Touch screen control are very imprecise."

Measurement.Blues
User Rank
CEO
Re: Touch screen scopes.......blah
Measurement.Blues   3/14/2014 5:45:11 PM
NO RATINGS
Rohde & Schwarz uses a single knob for four channels. Cleans up the rgith side of the box. See

Live Demo: Rohde & Schwarz RTE Oscilloscope

 

RWatkins
User Rank
Rookie
Re: Touch screen scopes.......blah
RWatkins   3/14/2014 3:58:56 PM
NO RATINGS
Sorry, but my first oscilloscope was (still have it, worked last time plugged in) a Heathkit 104.  THOSE analog oscilloscopes the knobs could be used for fine adjust.  Digital oscilloscopes, unless told otherwise ("vernier mode"), generally step in increments when one adjusts parameters.  Typically these increments are 1,2,5,10,etc.  Also, I normally like my zero point at some "rounded" vertical location (at least on a minor, dot, location on the vertical axis, with preference for major, line, locations).  As such, and as a long-tme digital scope user (early '90s), I am VERY ready for a touch screen tablet/phone type interface on a digital oscilloscope.  The problem with most digital scopes is that there are a lot of knobs for a 4-channel scope with cursors, trigger, and horizontal controls.  Alternately, one spends an inordinate amount of time going through button menus and submenus to share the controls provided.  I quit counting how many times I have been frustrated by changing from the Agilent to the Tektronix to the Fluke, etc. interface and operated the WRONG controls reflexively.  One BIG request to all of your oscilloscope interface designers out there:  Please get together and make at least most of your human-machine-interface consistent.

JRAS
User Rank
Rookie
Touch screen scopes.......blah
JRAS   3/14/2014 2:54:07 PM
NO RATINGS
I also am one of those old fuddy duddys who like KNOBS on my scope.  Sorry.  Touch screen control are very imprecise.  The click of a knob that is always in the same location, with a minimum of menues is my kind of scope.

MeasurementBlues
User Rank
Blogger
Re: But the icons….
MeasurementBlues   3/14/2014 1:06:14 PM
NO RATINGS
I just had a live demo of the new R&S RTE oscilloscope. I'll post a link here when it's posted.

Navelpluis
User Rank
CEO
Re: But the icons….
Navelpluis   3/14/2014 4:44:31 AM
NO RATINGS
Hi MeasurementBlues,

My engineering guts feeling tell me that the only thing to replace IEEE interface is a proper 10baseT or 100baseT interface. It is sooo easy to connect those, transformer coupled, wonderful interfaced devices. But hey, then it depends on the software running on your newly bought equipment if (and how) usable it can be for you. Also, it depends on the application on your PC or MAC.

Lots of devices have USB interface. In field use USB absolutely is not stable enough to do long term measurement jobs, not to speak about stand-alone applications. So for quick and dirty measurements it is nice to have USB at hand for screen dumps, etc, but nothing else (in my opinion)

In my younger years I have written assembly language. Over the years I grew towards an analog/RF engineer. Realizing the amounts of firmware in measurement devices I see that it often became too complicated to use. As an example: I love the old LeCroy home brew OS. Compare it to the newer ones with Windoze... Horrific. But on the other hand I realize that a windoze PC in a box is handy to share spread sheets etc. But for IEEE lots of free software is around to be able to get measurements into your PC or -preferable for me- my MAC.

Also. you already know about my "give it away" statement. The *reason* for software deveiopment written against a piece of measurement hardware (spectrum analyzer, RF generator electronics, etc) is to *expand* and *ease* the possibilities of the equipment. So I never have understood why equipment companies ask money for this and that and all the rest per each bit they have programmed. It is already there, finished, tested and programmed. I am happy to interface to the IEEE interface, as long as I can generate that specific modulation form, or analyze I2C, so why not give these options away....  ;-)

bcd_testech
User Rank
Rookie
end of an era (fat fingers)
bcd_testech   3/13/2014 9:08:40 PM
NO RATINGS
I'm one of the fuddy duddies that Agilent has apparently been dragging their feet for (or listening to). Smudged screens and imprecise back-and-forth attempts to get a touch-screen interface to guess what I want - yuck! Give me a dedicated knob with detents and I'll get there in 25% of the time with 10% of the swear words.

Still, I welcome the presence of a touch screen interface (even though one of my pet peeves is co-workers who cannot point out something in a waveform without leaving fingerprints) as long as the knobs are available. If (I guess I should say "when") I have to pay extra for a knob-interface box, I'll scrape up the $$ somehow.

MeasurementBlues
User Rank
Blogger
Re: But the icons….
MeasurementBlues   3/13/2014 11:38:18 AM
NO RATINGS
"The IEEE interface is a bit cumbersome, but playing with IEEE to USB dongles takes the old gear to a higher plan."

I'd like talk to you about the future of GPIB for an upcoming article. I predicted GPIBs slow demise 20 years ago. Maybe it's finally time...or not.

<<   <   Page 2 / 3   >   >>


Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Tired Old iPad 2 vs. Shiny New iPad Air 2
Max Maxfield
8 comments
I remember when the first iPad came out deep in the mists of time we used to call 2010. Actually, that's only four years ago, but it seems like a lifetime away -- I mean; can you remember ...

<b><a href=Betajet">

The Circle – The Future's Imperfect in the Present Tense
Betajet
5 comments
The Circle, a satirical, dystopian novel published in 2013 by San Francisco-based writer Dave Eggers, is about a large, very powerful technology company that combines aspects of Google, ...

Martin Rowe

Make This Engineering Museum a Reality
Martin Rowe
Post a comment
Vincent Valentine is a man on a mission. He wants to make the first house to ever have a telephone into a telephone museum. Without help, it may not happen.

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
16 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...