Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
Adele.Hars
User Rank
Rookie
Rest at 28FDSOI, 10nm FDSOI PDK from Leti in June
Adele.Hars   4/14/2014 6:59:54 AM
NO RATINGS
If 28nm turns out to be a "resting place", then 28nm FDSOI (w/perf & power equivalent to 20nm planar bulk but at a 28nm price), should certainly be a contender. Love takes time, @RickMerritt, and FinFETs had a lot more time (&$$) to get traction. But a better deal is a better deal, so don't write FDSOI off yet! Also, Leti will have the 10nm FDSOI PDK in June (yes, in just a couple months), so not sure why people are saying that FDSOI won't go the distance (my understanding is that it will go up against 7nm bulk FinFET -- much like 28nm FDSOI now goes up against 20nm bulk planar). As many have pointed out, competition is a good thing -- so really, both FinFET and FDSOI should coexist, serving the markets to which they're best suited, right?

resistion
User Rank
Manager
Re: No love, no clarity
resistion   4/12/2014 12:04:25 PM
NO RATINGS
Strictly speaking, 28 nm node is actually something like 45 nm half pitch (minimum), which is also very difficult and design-limiting for single-patterning lithography, being very near the resolution limit. It may therefore not necessarily give as effective a shrink, and possibly long lines still need to be cut, which may still be considered pseudo-double patterning. So possibly 40 nm is suitable as a "resting" node as well. You could have SMIC "resting" at 40, TSMC at 28, and Intel at 22. Maybe Samsung would still charge to 14?

_hm
User Rank
CEO
3D printer for 20nm chip at home
_hm   4/12/2014 9:12:50 AM
NO RATINGS
I eagerly await to see 20nm chip 3D printer at hobbyist home! This will accelerate innovations by leaps and bounds.

junko.yoshida
User Rank
Blogger
Re: No love, no clarity
junko.yoshida   4/12/2014 12:52:40 AM
NO RATINGS
@resistion, i think your argument here is totally valid, giving us some interesting perspectives. After all, we tend to focus on the latest node all the time (the nature of the media biz), but in reality, there are a lot of chips to be made in the current and previous nodes.

Previsou, when i posted an interview with SMIC CEO (http://www.eetimes.com/document.asp?doc_id=1321653), you mentioned, "28 nm is a great 'waiting' node, that's why it will support a big market." I think you are right.

ScottenJ
User Rank
Rookie
Re: I agree with the panel
ScottenJ   4/11/2014 11:18:50 AM
NO RATINGS
Intel was the big driver for 450mm and with their fabs relatively empty and fab 42 on hold they have pulled their support.

ScottenJ
User Rank
Rookie
Re: No love, no clarity
ScottenJ   4/11/2014 11:17:32 AM
NO RATINGS
My information is that Intel is in production on 14nm now and ramping up.

resistion
User Rank
Manager
Re: No love, no clarity
resistion   4/11/2014 10:46:40 AM
NO RATINGS
It has been the general impression that Intel 14 nm would arrive soon while SMIC 28 nm would always be delayed. The surprise is the other way around. It would disturb ("panic") those who have held the former stereotype.

It's not to criticize Intel or praise SMIC. SMIC has no reason to rush 28 nm, but it can only gain by getting there. Intel has lots to lose to not get to 14 nm, but it should be the first to get there; clearly it's more difficult than previous nodes.

rick merritt
User Rank
Blogger
Re: I agree with the panel
rick merritt   4/11/2014 9:32:44 AM
NO RATINGS
@ScottenJ: Thanks for the crisp analysis.

Why so long to get to 450mm wafers?

rick merritt
User Rank
Blogger
Re: No love, no clarity
rick merritt   4/11/2014 9:31:49 AM
NO RATINGS
@resistion: I don't understand what you mean by "panic" will ensure if/when SMIC gets to 28nm before Intel ramps 14nm? Just being funny, or...?

resistion
User Rank
Manager
Re: No love, no clarity
resistion   4/11/2014 3:41:52 AM
NO RATINGS
I don't think they're in a rush, but on their way there.

Page 1 / 2   >   >>


Flash Poll
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

MSGEQ7-Based DIY Audio Spectrum Analyzer: Testing
Max Maxfield
12 comments
In my previous column on this topic, we discussed the step-by-step construction of the first pass at a MSGEQ7-based DIY audio spectrum analyzer for use in my BADASS Display project. Of ...

Karen Field

June 2014 Cartoon Caption Winner
Karen Field
13 comments
Congratulations to "Wnderer" for submitting the winning caption for our June cartoon, after much heated conversation by our judges, given the plethora of great entries.

Jeremy Cook

Inspection Rejection: Why More Is Less in a Vision System
Jeremy Cook
3 comments
Albert Einstein has been quoted as saying, "Everything should be as simple as possible, but not simpler." I would never claim to have his level of insight -- or such an awesome head of ...

Jeremy Cook

Machine Fixes That Made Me Go 'DUH!'
Jeremy Cook
21 comments
As you can see in my bio at the end of this article, I work as a manufacturing engineer. One of my favorite things that happens on a Friday late in the afternoon is to hear my phone ring ...

Top Comments of the Week
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)