Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
KarlS01
User Rank
Manager
Re: Remember when...
KarlS01   5/28/2014 2:20:25 PM
NO RATINGS
The "early timing closure" means that a peripheral IP module is created including timing closure.  Then interconnect fabric jwires up the registered module ports. No logic in the paths, just wires.

KarlS01
User Rank
Manager
Re: Remember when...
KarlS01   5/28/2014 12:45:30 PM
NO RATINGS
@Betajet:  I did notice the ARM AXI interface was mentioned.  That implies an ARM  and that implies ZYNQ and that implies high cost -- just as you said.


Vivado/HLS only supports 7 series and whatever they call the latest devices.  The methodology is modular IP based.

I think:

1) design or acquire IP as a module that can be connected by the fabric.  The IP is a complete design with timing closure.  If all ports are registered, the timing that matters is the port connections.  Like adding a chip to a PCB, but on chip.

2) write the algorithms in C and HLS automates the DSP/accellerator design.  Do the rest of the design as before, but create a "pluggable" HDL module.  Let us wait and see if the "HLS" does anything more than DSP and IP module interconnect using AXI.

betajet
User Rank
CEO
Re: Remember when...
betajet   5/27/2014 1:57:57 PM
NO RATINGS
JMO/YMMV

I wonder if the purpose of HLS is to ensure you can't get timing closure with slower, cheap devices like Spartan and instead have to use faster, expensive chip families.  Ditto for efficient use of logic cells.

JMO/YMMV

DrFPGA
User Rank
Blogger
Remember when...
DrFPGA   5/27/2014 1:40:57 PM
NO RATINGS
it was all about fitting your design into the FPGA and getting timing closure by trying random changes because you really couldn't understand what was going on at the netlist level...

Now it's all about designing at the highest level possible and as quickly as possible. Are we going to go back to the days when to achieve timing closure 'up front' we are going to be making random changes because we don't know what's going on at the high-level? I hope not...

barunkd
User Rank
Rookie
Re: HLS is the need for FPGA Desing
barunkd   5/26/2014 7:04:00 AM
NO RATINGS
Dear Gary,

HLS tools are already there for several years. But the issue is the quality of RTL generated is not as efficient as hand written one in general, though I have not used Vivaldo HLS and can not comment on its quality.

I feel HLS tool can not be generic in nature (like synthesis tool). The style of efficient RTL writing depends heavily on the application and HLS tool needs to be customized for application. For example a RTL code doing video processing needs to run at significantly high frequency and hence the the output generated by HLS tool should be such that it does not create a long combinational logic between two flops. Also video data on which the processing is done stays in off-chip memory. Hence the RTL code should be such that it fetches significant chunk of data at a time as otherwise the processor memory transaction will delay the processing

Regards,

Barun

 

 

garydpdx
User Rank
CEO
Re: HLS is the need for FPGA Desing
garydpdx   5/25/2014 3:02:01 PM
NO RATINGS
@Barun - Xilinx acquired startup AutoESL (out of UCLA) a couple of years ago and now sells it as an add-on, Vivado HLS.  An ESL approach complements what Tom Feist presents for impementation and at Space Codesign, our SpaceStudio design software serves as an ESL design creation front-end (with true hardware/software co-design) to Xilinx's Vivado, able to go down to silicon with their HLS tool.  For implementation, you may be reusing IP out of libraries or from a third party, which the ESL modules could be mapped to, and Tom's presented methodology (which we follow) would be really helpful there along with results from running HLS.

barunkd
User Rank
Rookie
HLS is the need for FPGA Desing
barunkd   5/25/2014 4:58:56 AM
NO RATINGS
Efficient high level synthesis tool is the need of hour to make programmable logic (particularly FPGA) really useful to the user community. In a good amount of situations programmable logic is used by system engineers who are more comfortable with C/ C++ languages than RTL. High level synthesis will be really helpful for them. Off course there are few high level synthesis tools are available in market. But the efficiency of output RTL code is far from quality compared to the hand written RTL code. In terms of efficiency the output RTL code should be at least 80% in terms of area, power or frequency efficinecy compared to hand written RTL code

Regards,

Barun

 



Most Recent Comments
Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Tired Old iPad 2 vs. Shiny New iPad Air 2
Max Maxfield
6 comments
I remember when the first iPad came out deep in the mists of time we used to call 2010. Actually, that's only four years ago, but it seems like a lifetime away -- I mean; can you remember ...

<b><a href=Betajet">

The Circle – The Future's Imperfect in the Present Tense
Betajet
5 comments
The Circle, a satirical, dystopian novel published in 2013 by San Francisco-based writer Dave Eggers, is about a large, very powerful technology company that combines aspects of Google, ...

Martin Rowe

Make This Engineering Museum a Reality
Martin Rowe
Post a comment
Vincent Valentine is a man on a mission. He wants to make the first house to ever have a telephone into a telephone museum. Without help, it may not happen.

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
16 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...