Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 3 / 3
salbayeng
User Rank
Rookie
Re: Wormholes...
salbayeng   6/3/2014 3:29:44 AM
NO RATINGS
@David , re " and since it is just one LED reflecting back and forth you can't do that." .

Hmm , but the viewing angle of each LED changes as you move into the spiral ? maybe?

Years ago, I was messing with some prismatic solar concentrators, these are glass prisms, 20mm square at one end and 10mm square at the other, 70mm long and use total internal reflection. You glue a very expensive 10mmx10mm Triple Junction PV cell on the small end, then when you look in the big end it looks like a 20mm square PVcell. But what you gain in area you lose in acceptance angle. 

The thing is when looking at a certain critical angle stuff behind the prism would appear and dissappear , so you could put red, green,blue colored postits behind the prism, and you would see different colors according to your head (angular) position, while staring at the same spot in space.

So if one were to contrive some kind of laser cut perspex wedge, and put an array of leds along a long edge, and just poke the pointy edge of the wedge into the holes where the leds are currently, you would be looking at different LED's within the array according to how "deep" inside the wormhole you looked.  The wormhole would also change appearance when you moved your head to get some freaky holographic effect. 

David Ashton
User Rank
Blogger
Re: Wormholes...
David Ashton   6/3/2014 3:06:12 AM
NO RATINGS
@salbayeng...you could have a fixed (but slightly moveable) mount on the back mirror at 9 o'clock.  You then have a moveable mount at 3 o'clock (for side to side movement) and one at 6 o'clock (for up and down movement).  The moveable ones just need a nut attached to the mirror, and a screw attached to a small geared or stepper motor to move the mirror.   I'm sure it would need a bit of experimentation to get it right, but to have the hole moving at the same time as the lights are changing would be awesome.

With a deeper mirror like this one, you could maybe have lines of LEDs mounted parallel to the axis on the sides and light them in sequence to give depth changing effects - I think the further back the lighted LED was, the more the line of reflections would expand?

Max has got plenty of ideas to play with :-)   Just not the time :-(

 

salbayeng
User Rank
Rookie
Re: Wormholes...
salbayeng   6/3/2014 2:47:35 AM
NO RATINGS
Struggling to improve on Davids suggestion, but if the back mirror was on a flexible substrate, then you could contrive to change its curvature (e.g by push/pulling on the central part with a servo). this would have the effecto of expanding/contracting the wormhole.  

Or fix the mirror at the centre and have a servo in each corner. I'm guessing a long lever arm would be needed as the infinity mirror principle needs only fractions of a mm displacement. Then you could do all sorts of moving/ rotating/ zooming effects,

David Ashton
User Rank
Blogger
Re: Wormholes...
David Ashton   6/2/2014 6:25:33 PM
NO RATINGS
@Max...well I'm glad I picked up the multiple lines of LEDs.   It is indeed a labour of love (some guys got WAAAY to much time on their hands :-)

The next thing would be to motorise the mirror tilt so you could have it weaving around in all direections.   There's something you can trump him with!

Max The Magnificent
User Rank
Blogger
Re: Wormholes...
Max The Magnificent   6/2/2014 6:06:55 PM
NO RATINGS
@David: ...If this is the case then it's not that much ahead of yours?...

Sadly, he's light-years ahead of mine -- he's not just got the one LED in a thin slice -- his setup is much deeper and he had multiple LEDs going backwards -- check out the pictures in the column I linked to in my blog

David Ashton
User Rank
Blogger
Wormholes...
David Ashton   6/2/2014 6:03:38 PM
NO RATINGS
Max I presume this is an infinity mirror with effects....based on the fact that the streaks of lights disappearing down the wormhole are all the same colour and change at the same time?   If this is the case then it's not that much ahead of yours?    It looks like he has a couple of layers of LEDs, not just one.    It's very pretty but it does not give the effect of disappearing down the hole, that would need the lights to effectively "Travel" down the hole (like the old Microsoft Stars screen saver in reverse) and since it is just one LED reflecting back and forth you can't do that.....   Well, if you could dramatically slow down the speed of light inside the mirror you might be able to do this...there's something for you to work on :-)

<<   <   Page 3 / 3


Most Recent Comments
HitheshM500
 
NIRANKUSH456
 
NIRANKUSH456
 
David Ashton
 
Rich Krajewski
 
sranje
 
MeasurementBlues
 
MeasurementBlues
 
Sanjib.A
Flash Poll
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Rishabh N. Mahajani, High School Senior and Future Engineer

Future Engineers: Don’t 'Trip Up' on Your College Road Trip
Rishabh N. Mahajani, High School Senior and Future Engineer
3 comments
A future engineer shares his impressions of a recent tour of top schools and offers advice on making the most of the time-honored tradition of the college road trip.

Max Maxfield

Juggling a Cornucopia of Projects
Max Maxfield
7 comments
I feel like I'm juggling a lot of hobby projects at the moment. The problem is that I can't juggle. Actually, that's not strictly true -- I can juggle ten fine china dinner plates, but ...

Larry Desjardin

Engineers Should Study Finance: 5 Reasons Why
Larry Desjardin
37 comments
I'm a big proponent of engineers learning financial basics. Why? Because engineers are making decisions all the time, in multiple ways. Having a good financial understanding guides these ...

Karen Field

July Cartoon Caption Contest: Let's Talk Some Trash
Karen Field
140 comments
Steve Jobs allegedly got his start by dumpster diving with the Computer Club at Homestead High in the early 1970s.

Top Comments of the Week
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)