Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 2 / 2
elizabethsimon
User Rank
Author
Re: Another fine article....
elizabethsimon   6/16/2014 5:47:10 PM
NO RATINGS
The 2032 and similar 3V coin cells are a non-rechargable Lithuim chemistry. I used to know what one but can't remember the details right now. I guess we'll have to wait for a future article from Ivan...

 

David Ashton
User Rank
Author
Another fine article....
David Ashton   6/16/2014 4:24:49 PM
NO RATINGS
HI Ivan - another fine artilce, thanks.

> Laptops and their batteries seem to be some of the worst offenders...

My work laptop - a Lenovo T510 which is showing its age in other respects - has a great battery with over 3 hrs life BUT best of all the run time indicator is almost bang on.  It is in time (hrs/min) which I reckon is the most useful indication (which answers Duane's question)  but switches to % when it is on charge.  I have never recalibrated it and it's only a couple of minutes out -if that - at the end of the battery life.  I guess I am lucky....

Are the ubiquitous computer memory "coin cells" - 2032 et al - Silver oxide or another chemistry?  They are nominally 3V so if Silver Oxide they'd have to be 2 cells in series so I suspect they are something else?

Duane Benson
User Rank
Author
Re: Battery or meter?
Duane Benson   6/16/2014 11:56:39 AM
NO RATINGS
Ivan - What's the most common battery display system used: battery capacity, or run time left? And, which do you find to be the most useful?

Duane Benson
User Rank
Author
Battery or meter?
Duane Benson   6/16/2014 11:55:24 AM
NO RATINGS
This is really calibrating the measuring system. Is that correct? I've heard about this, but never had it explained clearly.

Some systems that I have list battery capacity as percent remaining. Others list it as time remaining. The challenge with using time as the measuring stick is, of course, that it's dependent upon the specific load.

I've seen some systems that appear to base the time left on the instantaneous load. If I turn up the brightness on the backlight, time left will drop and turning down the backlight does the opposite. Other devices seem to attempt to base the time left on the average consumption from full charge. It would be nice if all the systems were consistent.

The funny thing is that this really isn't a new problem. Every car I've owned has had a different accuracy curve for the gas gauge. It will move slowly for the first half of the gauge, then drop quite fast once indicating below half a tank. The gage does nothing to compensate for the difference in fuel consumption in the city vs. on the highway.

I understand that the car gage is simply attempting to display the quantity, not rage. Eventually, I get an internal sense for range. I kind of do the same with my electronic devices. I calibrate my head.

<<   <   Page 2 / 2


Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...