Oh yes hard-drive crashes are very very common. I had my playstation hard-drive got crashed and believe it or not local ony tech support people couldnt get it fixed too. How pathetic... But we just googled how to fix a crashed hard drive of PS3, bought one from the market and fixed it ourselves.
I had aother extrenal storage drive that too got crashed when I moved between countries. But hard luck no data could be got back. YOu cannot have back ups of backups and back ups. There has to be an end to backup and may there is some storage that doesnt crash :-)
I had a hard drive fail in a smokey way. The +5V red wire (well, it used to be red before the insulation melted off) indicated it was the HD that shorted; the resulting lack of power supply regulation caused the +12V to rise and took out the CD drive as well.
Professional data recovery services like WeRecoverData.com would be able to help you from data loss which are cause by operating system failure, accidental damage and hard disk failure. They have sophisticated state of the art equipments which are able to recover data from any types for storage. They have a high level of expertise and are trusted in the field.
I have had no luck backing up my phone's contacts to iCloud. Only a few contacts seem to get there. I read somewhere that it has something to do with groups and it may be something to do with the fact that our two phones were on the same Apple ID at one time. So instead, each phone syncs to a gmail account.
Maybe I am the exception. I have yet to have my hard drive crash. But I have lost two motherboards to unexplained premature failure (one deskside, one laptop), and another motherboard that was easily repairable. All the disk drives were fine. I have more working disks than computers to put them into.
I did have a drive that started returning errors and timeouts until it warmed up, but that's a separate issue. It never crashed or failed. That was from the stone age of PC disk drives and not the most mature technology, and I think maybe the separate controller card (back when they had those) was actually at fault.
I've been told that you can harvest incredibly powerful permanent magnets from dead hard drives ... as in, if you stick the magnet on your fridge, you might not get it off again. I've got to try that ... if I ever get a dead drive to take apart.
Andy_I you are certainly an exception. The last desktop I bought had its hard drive (Western Digital) die after 15 months. The boot sector failed. I reformatted the drive and reinstalled Windows and it failed again a week later. I replaced it with a Seagate and that's been running for 8 years. No data was lost as we ere able to get animage fo the drive and copy it to the new drive.
Andy wrote: Maybe I am the exception. I have yet to have my hard drive crash. But I have lost two motherboards to unexplained premature failure ... I did have a drive that started returning errors and timeouts until it warmed up, but that's a separate issue.
My experience echoes Andy's (knock on wood not coupled to computer). It might be interesting to correlate which part dies first with whether you shut down your computers when not in use (as I do) or leave them running all the time. In the former case, it's probably thermal mismatch that causes BGA and other SMT solder connections to fail. In the latter case it's probabaly wear on bearings, accumulation of dust, capacitor electrolyte boiling away, and increased exposure to malware attacks. To quote Indiana Jones: "It's not the years, honey, it's the mileage."
Speaking of mileage, I wonder how this correlates to using MS Windows versus GNU/Linux. Windows machines seem to consume a lot of disk drive mileage scanning for malware.
I open my wife's desktop PC twice a year to clan out the dust. I noticed a few years ago that got louder with summer's higher temperatures and humidity. Cleaning brought the noise level down and increased air flow.
My office laptop (the one I'm using now) had a fan failure a few weeks ago. I turned the computer on its side, gave it a tap, and used a vacuum cleaner to suck out some dust through the vents. It came back to life.
I always wear a static-dissipative wrist strap when working on the desktop PC.
@betajet I concur... repeated shutdown & bootup cycles do fatigue the solder joints in BGA packages whereas the always-on condition results in fatigue that manifests differently... reminds me of the Aerospace analogy -high cycle fatigue (HCF) and low cycle fatigue (LCF). Takeoffs and landings are of the latter type whereas the wing flutter during flights results in the former.
Back to the hard disks, I always get the dust out of my laptops and desktops. This has not stopped my hard disks from crashing! Only once I lost data following the advise of an 'expert!' One can most often read the data sectors of a 'failed' hard drive by powering it externally & connected with a eSATA to USB cable (like Sabrent).
Just look at the review section on Newegg; I've had several memory sticks fail.
At least one plus for rotating rust: often, there's often a warning that the drive is starting to fail (e.g. increasing number of bad sectors) and you can often get something off it. With flash, it seems to be much more all or nothing.
The all or nothing nature of USB stick failure is highly disconcerting. In most cases where I've had a hard drive failure, I've usually been able to recover much of the data. On the other hand, with the USB sticks that I've had fail, as near as I could tell they were dead beyound redemption. A couple weeks ago I grabbed a USB stick because I wanted to transfer some files to a laptop that wasn't on the network. Much to my annoyance, it was completely dead. This was one of the ones that I'd used to store data from a previous hard drive crash. Fortunately the data had long since been restored...
By the way, that HD failure was on a RAID-1 mirrored disk so no data was lost. I just needed to back it up before I sent it to be repaired...
I've had several hard drives fail over the years, including one in a NAS box that was set up as RAID 5, so that any one of the 4 drives can fail without losing any data. It's worth giving up 25% of your NAS capacity for peace of mind.
To my surprise, I think I have just as many power supply failures in desktop PCs as I have had hard drive failures. Fortunately, those power supply failures have always been non-catastrophic and they are cheap & easy to replace.
Actually, with large HDDs, RAID5 (1 redundant disk) isn't safe, since there is a definite possibility of another failure during rebuild (I've heard of this happening more than once). It's better to go with 2 or even 3 redundant disks per group or simply mirror (which, given the price of HDDs, isn't big deal).
Also, there's the very real possibility of bit-rot (bits get flipped - and if the flipped bits get copied to your backups, then they become corrupted).
And, for ZFS users, it's highly recommended to use ECC memory so bits don't get corrupted in memory and then get written to disk (ZFS has extra protection for data on disk).
I once broke a USB flash drive by stepping on it. Fortunately, it was functional long enough to copy the data to another flash drive. My wife keeps all of her business docs on a flask drive. I bak it up weekly to an external hard drive and to another flash drive.
I agree with other readers: harddisks die, so do USB sticks and floppies. Even CD's die - mostly from scratches - especially the cheaper brands. I use two programs for backup. Carbonite is a paid program, which does the back-up in the background. That works very well. The other one is Dropbox, which is free. You have to make sure you put your files in the Dropbox folder though, which I tend to forget. Bottom-line: you get what you pay for.
I have an ADSL router that has a USB socket and if you plug in a USB memory stick you can use it as a network drive. Only 16 GB but it's enough for the really important stuff. I cycle them occasionally and keep the last one in the shed. That way, if the house burns down I'll still have my important data. I also back up just about everything to a second hard drive on my desktop. I'm not sure if I could get, say a 1Tb USB hard drive and plug it into the router.
I used to use SCSI tape drives but USB sticks have pretty much outstripped them for capacity now. But Martin, your article has made me think about backing up more often. You tend to be very good at it after a hard drive crash (I have had 2) but you get blase after a few years.....
I bought a new wireless router about 6 weeks ago and put a 4GB USB stick in it so I can transfer files scross computers. I have a wide collection of USB sticks that I get from T&M companies. They put press releases and product photos on them. Biggest one so for is 4GB. The very first one is still in use, it's 16MB. It stays permanently in the back of the desktop computer that my wife uses. She keeps her entire business on a 1GB USB drive that I back up regularly to the computer's hard drive and to an external.
Surprisingly, I have never had a hard drive fail (and I am telling the truth!). However, there have definitely been a few instances during which I needed to completely format my hard drive and re-install all the software. After the first, miserable experience with my late Toshiba, which needed reformatting every few months or so due to a "black screen of death", I decided to start paying for an online service my dad uses for backing up all of his information. Done. No external hard drive or other external memory device is needed. It may take some extra time to retreive the information, however an external hard drive would just add another layer of complication I am trying to avoid.
I haven't had a failure of a solid state hard drive... yet. But it will fail. If you only have one backup, you have none.
Hard drives are cheap. Have a bootable clone of your drive at home, another in your office, and a backup of your data in the cloud. Do you want to lose your data if there is a leak from the ceiling?
It is easy to clone your drive using Carbon Copy Cloner or something like that, and then when your drive fails you are up and running in the time it takes to connect the new drive and reboot. Otherwise when your drive fails you need to reinstall each and every piece of software and data from scratch. By Murphy's law it will happen when you have a deadline for an important project - can you affod the time just to save the hundred bucks that a terabyte costs?
@pait you have a good point a USB3 1TB drive costs under $100. I've seen $89 at Costco for a Seagate. It's worth buying one just to clone your hard drive and another to store everyday data and a third to back up the one used every day.
Replay available now: A handful of emerging network technologies are competing to be the preferred wide-area connection for the Internet of Things. All claim lower costs and power use than cellular but none have wide deployment yet. Listen in as proponents of leading contenders make their case to be the metro or national IoT network of the future. Rick Merritt, EE Times Silicon Valley Bureau Chief, moderators this discussion. Join in and ask his guests questions.