Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 6 / 11   >   >>
David Ashton
User Rank
Blogger
Re: Nibblers
David Ashton   7/12/2014 6:24:50 AM
NO RATINGS
Hi Crusty.  That type is good.  Contact the seller and see if you can negotiate a bit on the postage - bear in mind the figure I gave would have been to Australia, it might be cheaper to the UK.  You may find others - I think I searched on "hand nibbler" to find that one, but try "nibbling cuttter" and other such search terms.  There are some very tasty purpose built electric ones out there as well, which is why I tried including "Hand" in it.   Good luck....

Crusty1
User Rank
CEO
Re: Nibblers
Crusty1   7/12/2014 6:13:14 AM
NO RATINGS
Hi David: That's the type I had and they rearly do work work, especially from inside the box outward.

I will now see how the budget is after buying all those bits of electronic frippery that a man in the know just has to have.

Cheers

Crusty

David Ashton
User Rank
Blogger
Re: Nibblers
David Ashton   7/12/2014 6:02:35 AM
NO RATINGS
Crusty...have a look at this one I found on Ebay, it is identical to the one I have:

http://www.ebay.com.au/itm/Hand-Nibbler-Sheet-Metal-Cutting-Tool-NEW-/270996948066?pt=LH_DefaultDomain_0&hash=item3f18ad4462&_uhb=1



US$ 30 plus nearly 50 postage.  Also sharp intake of breath material.....

David Ashton
User Rank
Blogger
Re: Nibblers
David Ashton   7/12/2014 5:28:59 AM
NO RATINGS
@Crusty I found the following at Element 14 (Farnell) but (a) none of them look like mine and (b) the prices are likely to give you a sharp intake of breath.....(as E14 prices are wont to do :-)

http://uk.farnell.com/jsp/search/results.jsp?N=0&Ntk=gensearch&Ntt=nibbler&Ntx=mode+matchallpartial&suggestions=false&ref=globalsearch&_requestid=61574

David Ashton
User Rank
Blogger
Re: Nibblers
David Ashton   7/12/2014 5:21:30 AM
NO RATINGS
Hi Crusty..  Don'tcha hate it when one of your tools passes on to tool heaven and you can't find another one?  I will keep my eyes open and let you know if I find one..   I can thoroughly recommend the drill-accessory ones but I see your point, my hand one is also more suited to square holes, though it is going the way of yours I fear.....

Crusty1
User Rank
CEO
Nibblers
Crusty1   7/12/2014 4:54:58 AM
NO RATINGS
Hi David,

Nibblers for aluminium sheet of up to 1mm thickness I had a lovely hand operated nibbler, sadly it passed away, through my own fault of presenting it with too much to nibble.

Problem is I have never been able to find another, Its not always useful to have a drill driven one.

Car boots and second hand tool shops have never turned up another for me. If any reader knows wherethe are still obtainable then you would get a big thanks from Crusty.

Nibblers are great for square holes.

 

David Ashton
User Rank
Blogger
Re: Kind of limited article
David Ashton   7/10/2014 4:46:15 PM
NO RATINGS
@Another - this article could have been 3 or 4 times the size it is and I still would not have covered all possible ways of making holes.  

So how WOULD you make a hole in glass?  As I recall there are special drill bits for that??

another nickname
User Rank
Rookie
Kind of limited article
another nickname   7/10/2014 3:53:33 PM
NO RATINGS
I use a bit wider variety of tools to make holes.

Most of the time, it's just a nail and a hammer . It's the breakable medium (e.g. glass) when you have to get creative. Microtorch (and anything combustible) gets me excited easily but I couldn't use it as much as I'd like to. Old soldering iron could be used to make holes in PVCs - of course, you wouldn't use the tip directly, you would wrap metal wire of needed diameter on it . And then there are chemicals - lovely sulfuric acid made more holes in my clothes than in the objects of my experiments.

TonyTib
User Rank
CEO
Re: drills
TonyTib   7/10/2014 12:59:01 PM
NO RATINGS
Also, another option is to look on eBay for a working used drill of the same or similar model, for one to salvage for parts, or for the broken part.  It's a long shot, but worth trying.

 

 

TonyTib
User Rank
CEO
Re: drills
TonyTib   7/10/2014 12:51:50 PM
NO RATINGS
It looks like not everything is made in China; for example, on Amazon I found a German made Bosch drill (for >$400) and a German made Fein drill (>$800).  I believe that Proxxon rotary tools are still made in Germany, but they're not drills.


BTW, just about everything is "globally sourced", including a lot of stuff that's "Made In China".  For example, most memory (DRAM, flash) isn't made in China.

Also off topic: my vacuum is a German-made Bosch canister vac.  The price was reasonable (unlike Miele and some others).  It's 8 years old and still going strong; the Dyson canister vac was more expensive, made in Malasia, and had a lot of quality complaints.

<<   <   Page 6 / 11   >   >>


Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
<b><a href=Betajet">

The Circle – The Future's Imperfect in the Present Tense
Betajet
5 comments
The Circle, a satirical, dystopian novel published in 2013 by San Francisco-based writer Dave Eggers, is about a large, very powerful technology company that combines aspects of Google, ...

Max Maxfield

Recommended Reads From the Engineer's Bookshelf
Max Maxfield
27 comments
I'm not sure if I read more than most folks or not, but I do I know that I spend quite a lot of time reading. I hate to be idle, so I always have a book or two somewhere about my person -- ...

Martin Rowe

Make This Engineering Museum a Reality
Martin Rowe
Post a comment
Vincent Valentine is a man on a mission. He wants to make the first house to ever have a telephone into a telephone museum. Without help, it may not happen.

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
16 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...