Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
resistion
User Rank
Author
Re: Shrinking pie
resistion   7/21/2014 11:02:42 AM
NO RATINGS
And this cycles back to the vendor side as well. The combo of Applied and TEL is just the most obvious example.

Jessica Lipsky
User Rank
Author
Re: Shrinking pie
Jessica Lipsky   7/21/2014 10:22:32 AM
NO RATINGS
Perhaps, by that point, we'll see further consolidation among major OEMs and semi companies. 

resistion
User Rank
Author
Re: More rumors
resistion   7/20/2014 5:07:37 AM
NO RATINGS
But at least TSMC got the 20 nm order.

resistion
User Rank
Author
More rumors
resistion   7/20/2014 5:00:04 AM
NO RATINGS
Reuters reports Samsung won the 14 nm for Apple A9.

escher
User Rank
Author
Shrinking pie
escher   7/16/2014 9:46:31 PM
NO RATINGS
All these foundries seem to be chasing the same leading-edge business - which will inevitably shrink as the ROI of scaling diminishes. This is not accounting for Intel making a big play in the Foundry space with its huge capacity and world-class fabrication capability. Someone will be left owning a lot of expensive and under-utilized equipment. 

AZskibum
User Rank
Author
Re: What happen to tear down people?
AZskibum   7/14/2014 7:48:02 PM
NO RATINGS
A good rumor typically seems logical to almost everyone, and therefore seems like it must be true. But it is still a rumor. We will see what Apple does after they actually do it.

Gondalf
User Rank
Author
Re: Apple (and others) wants too much
Gondalf   7/13/2014 6:12:51 AM
NO RATINGS
Sure in the past years, i well know this, as Apple devices were a news for customers but now it's totally different. Apple is the very first to ship a 20nm SOC, not even Qualcomm will be able to do this with 810; Apple nearly is working in the risk production (low yields) because their devices are slowly losing appeal, they need of A8 "now" not sometime n H1 next year. The same patterning will follow on 16nm and 10nm because Apple has realized that without a fast refresh of phones and tablets the USA market will shift to good enough devices mediatek/rockchip powered.

And yes, many of the news on latests SOCs are only crappy gadgets, no innovation. Do you call innovation an LTE modem capable of 300Mbps on a carrier infrastructure able to give only 15/20Mbps if all goes well......it's a gadget for idiots, like fingerprint.....in a phone?? LOL. We do not speak of the displays and Gpus with a resolution that the human eye is unable to appreciate on little diagonal.  

 

magrathean-man
User Rank
Author
Re: Apple (and others) wants too much
magrathean-man   7/13/2014 5:39:00 AM
NO RATINGS
Looks like you have no idea of what you are talking about. Apple, typically, uses one (or two) nodes removed from the latest, bleeding edge process nodes that the foundaries supply. That's not because they don't want to; like you rightly mention, it takes time to get to reasonable yields on the latest technology nodes and no one would like not to make more money!

And what useless gadgets? There are good uses with every technology innovation and leaps. And that kindles innovation too. 

Gondalf
User Rank
Author
Apple (and others) wants too much
Gondalf   7/13/2014 4:16:01 AM
NO RATINGS
We are in strange times. Apple, Qualcomm and others want a new shrink every 12/18 months, mainly to have "new" produts in shops to attract the customer to buy useless gadgets. Foudries are under pressure because this fast shrink is "NOT POSSIBLE" expecially at finer nodes like 14nm or 10nm.

This is the reason Apple is silent about supplier, she goes to the faster one on a given one, changing every year if possible.

I think than this is a crazy manner to do business. Instead of innovate (a tick tock ala Intel for example), they want to shrink fast adding new features to shitty ARM ISA.

My best wishes to Foundries, still i dont think this approach will be usefull to archieve strong transistor performance and dramatic power reductions, These things need time and the two years cycle is the minimum, three years i think could be even better at these terrific nodes without the help of good tools from ASML.

tangey
User Rank
Author
Re: What happen to tear down people?
tangey   7/11/2014 10:47:22 PM
NO RATINGS
I didn't say they change foundries, I said they change process.
Anandtech.com My memory though it was 32->28nm, but actually it was 45->32nm

Page 1 / 2   >   >>


Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
LEDs are being used in current luxury model automotive ...
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...