Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 2 / 3   >   >>
rmaire
User Rank
Author
ASML, IBM & EUV
rmaire   8/1/2014 12:43:27 PM
NO RATINGS
Imagine that a few years ago HP announced it was developing a new ultra high resolution printer capable of printing 1500 pages an hour with resolution of 10K dots per inch resolution. 
Imagine that the printer has been delayed and plagued by technology development issues, with slow progress being made to the point where customers wonder if it will ever work.
 
Then one day HP and a major customer announce that they successfully ran 637 sheets of paper through the printer in an hour as proof that it was well on its way to being a working printer. 
 
However HP and the customer conveniently leave out the fact in their announcement that the the paper went through the new printer without anything ever being printed on the paper and the paper came out as blank as it went in. In fact some of the blank paper in the output tray was recycled back to the input tray to be run through the printer again coming out blank again.
 
No toner was used and nothing showed up on the paper yet HP claimed that the new printer achieved a new "milestone",  "watershed" break through rate of 637 pages an hour.
 
Would you as an investor or analyst view this as an honest and fair representation of progress on the part of HP and its customer or would you find this misleading ?
 
Well,  that is what happened with IBM and ASML.....


resistion
User Rank
Author
Re: Intel has 10nm w/o EUV
resistion   7/31/2014 5:03:46 AM
NO RATINGS
At 10 nm EUV doesn't have as easy opportunity as at 100 nm. The required upgrades (new mask, pellicle, high NA, resist) are weighed against multiple immersion exposures. So far not too many required overall. Beyond 10 nm has other uncertainties as well, including multiple EUV exposures.

wilber_xbox
User Rank
Author
Re: Intel has 10nm w/o EUV
wilber_xbox   7/31/2014 4:29:16 AM
NO RATINGS
introducting more masks and cut masks should drive the price per die so economically EUV will be much better IMO.

resistion
User Rank
Author
Re: good news
resistion   7/31/2014 1:19:44 AM
NO RATINGS
34 WPH is still below the previous 70 WPH target. 20 mJ/cm2 dose is also quite noisy below 20 nm.

resistion
User Rank
Author
Re: Intel has 10nm w/o EUV
resistion   7/31/2014 1:12:19 AM
NO RATINGS
I thought he was referring to Intel's 10 nm, otherwise the EUV requiring these would defeat the purpose.

rick merritt
User Rank
Author
Re: good news
rick merritt   7/30/2014 11:55:08 PM
NO RATINGS
@resistion: 34 wafers/hour to be specific

rick merritt
User Rank
Author
Re: Intel has 10nm w/o EUV
rick merritt   7/30/2014 11:52:53 PM
NO RATINGS
@Wilbur: I did not know to ask but I will request an IBM engineer jump on and answer.

resistion
User Rank
Author
Re: Intel has 10nm w/o EUV
resistion   7/30/2014 4:41:19 PM
NO RATINGS
They use "pitch quartering" for 15-22 nm half-pitch lines. There can be up to four additional "cut" exposures.

resistion
User Rank
Author
Re: good news
resistion   7/30/2014 2:31:20 PM
NO RATINGS
Besides light source power, EUV already has other resolution-limiting issues like shot noise and multilayer angular bandwidth. And it's still nowhere near 100 WPH.

wilber_xbox
User Rank
Author
Re: Intel has 10nm w/o EUV
wilber_xbox   7/30/2014 2:20:10 PM
NO RATINGS
Rick, is it using the existing methods such as unidirectional patterns, mask optimization and breaking the chip patterns into 2-3 masks etc or something more innovative.

<<   <   Page 2 / 3   >   >>


Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Like Us on Facebook
Special Video Section
The quality and reliability of Mill-Max's two-piece ...
01:34
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...