Embedded Systems Conference
Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 3 / 3
Steve Manley
User Rank
Author
Re: Snap
Steve Manley   8/6/2014 12:03:23 PM
NO RATINGS
@Snap: You seem to have a second chuck mounted on the drill. What part do you use?

The chuck on my drill wont grasp the wire tight enough so I use the smaller modlers chuck held firm in the drill chuck. this smaller chuck grasps the wire much more reliably.

Steve Manley
User Rank
Author
Re: A bit of a twist
Steve Manley   8/6/2014 12:00:01 PM
NO RATINGS
@Max: 1) Are the twists visible and do they detract from the overall feel in the final cube?

Yes a darker grey spiral can be seen but only close up and is more visible if you look down the length of the wire. Looking at a panel from a couple of feet away I cant see the spirals so no it doesn't detract from the overall feel.

2) You start with 20WG wire -- what's the SWG value after you've stretched and twisted it?

SWG means Standard Wire Gauge which defines the wires diameter. I believe the American and UK standards are slightly different. The larger the SWG number is the smaller the wire diameter and after twisting the 20SWG wire I would guess it's nearer 21SWG.

Steve Manley
User Rank
Author
Re: Love the video
Steve Manley   8/6/2014 11:48:41 AM
NO RATINGS
@Max:  I love the video -- it makes everything so clear. I also love the simple jigs you create. I'm very much looking forward to the next blog whch will look at the various jigs and the assembly process in more detail.

Thanks for the feedback. I'm looking forward to the posting as well, I think the construction of the cube should become clearer.

Clive
User Rank
Author
Re: Snap
Clive"Max"Maxfield   8/6/2014 11:43:14 AM
NO RATINGS
@Antedeluvian: I described the same technique to twist two wires together in my blog "Top 17 Helpful Hints for Constructing Electronic Systems"

As soon as I saw Steve's video I had a flashback to your blog:-)

antedeluvian
User Rank
Author
Snap
antedeluvian   8/6/2014 11:20:38 AM
NO RATINGS
Fascinating. I described the same technique to twist two wires together in my blog "Top 17 Helpful Hints for Constructing Electronic Systems"

You seem to have a second chuck mounted on the drill. What part do you use?

Clive
User Rank
Author
A bit of a twist
Clive"Max"Maxfield   8/6/2014 11:18:20 AM
NO RATINGS
@Steve: With regard to straightening the wire, I understand what you are doing and why you are doing it, but I have two questions about the "twists" in the wire:


1) Are the twists visible and do they detract from the overall feel in the final cube?

2) You start with 20WG wire -- what's the SWG value after you've stretched and twisted it?

Clive
User Rank
Author
Love the video
Clive"Max"Maxfield   8/6/2014 11:17:09 AM
NO RATINGS
@Steve: I love the video -- it makes everything so clear. I also love the simple jigs you create. I'm very much looking forward to the next blog whch will look at the various jigs and the assembly process in more detail.

<<   <   Page 3 / 3


Radio
NEXT UPCOMING BROADCAST

As we unveil EE Times’ 2015 Silicon 60 list, journalist & Silicon 60 researcher Peter Clarke hosts a conversation on startups in the electronics industry. Panelists from incubators join Peter Clarke in debate.
Flash Poll
Top Comments of the Week
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Special Video Section
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LT®3042 is a high performance low dropout linear ...
Chwan-Jye Foo (C.J Foo), product marketing manager for ...
The LT®3752/LT3752-1 are current mode PWM controllers ...
LED lighting is an important feature in today’s and future ...
Active balancing of series connected battery stacks exists ...
After a four-year absence, Infineon returns to Mobile World ...
A laptop’s 65-watt adapter can be made 6 times smaller and ...
An industry network should have device and data security at ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...