Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 3 / 3
Steve Manley
User Rank
Blogger
Re: Snap
Steve Manley   8/6/2014 12:03:23 PM
NO RATINGS
@Snap: You seem to have a second chuck mounted on the drill. What part do you use?

The chuck on my drill wont grasp the wire tight enough so I use the smaller modlers chuck held firm in the drill chuck. this smaller chuck grasps the wire much more reliably.

Steve Manley
User Rank
Blogger
Re: A bit of a twist
Steve Manley   8/6/2014 12:00:01 PM
NO RATINGS
@Max: 1) Are the twists visible and do they detract from the overall feel in the final cube?

Yes a darker grey spiral can be seen but only close up and is more visible if you look down the length of the wire. Looking at a panel from a couple of feet away I cant see the spirals so no it doesn't detract from the overall feel.

2) You start with 20WG wire -- what's the SWG value after you've stretched and twisted it?

SWG means Standard Wire Gauge which defines the wires diameter. I believe the American and UK standards are slightly different. The larger the SWG number is the smaller the wire diameter and after twisting the 20SWG wire I would guess it's nearer 21SWG.

Steve Manley
User Rank
Blogger
Re: Love the video
Steve Manley   8/6/2014 11:48:41 AM
NO RATINGS
@Max:  I love the video -- it makes everything so clear. I also love the simple jigs you create. I'm very much looking forward to the next blog whch will look at the various jigs and the assembly process in more detail.

Thanks for the feedback. I'm looking forward to the posting as well, I think the construction of the cube should become clearer.

Clive
User Rank
Rookie
Re: Snap
Clive "Max" Maxfield   8/6/2014 11:43:14 AM
NO RATINGS
@Antedeluvian: I described the same technique to twist two wires together in my blog "Top 17 Helpful Hints for Constructing Electronic Systems"

As soon as I saw Steve's video I had a flashback to your blog:-)

antedeluvian
User Rank
Blogger
Snap
antedeluvian   8/6/2014 11:20:38 AM
NO RATINGS
Fascinating. I described the same technique to twist two wires together in my blog "Top 17 Helpful Hints for Constructing Electronic Systems"

You seem to have a second chuck mounted on the drill. What part do you use?

Clive
User Rank
Rookie
A bit of a twist
Clive "Max" Maxfield   8/6/2014 11:18:20 AM
NO RATINGS
@Steve: With regard to straightening the wire, I understand what you are doing and why you are doing it, but I have two questions about the "twists" in the wire:


1) Are the twists visible and do they detract from the overall feel in the final cube?

2) You start with 20WG wire -- what's the SWG value after you've stretched and twisted it?

Clive
User Rank
Rookie
Love the video
Clive "Max" Maxfield   8/6/2014 11:17:09 AM
NO RATINGS
@Steve: I love the video -- it makes everything so clear. I also love the simple jigs you create. I'm very much looking forward to the next blog whch will look at the various jigs and the assembly process in more detail.

<<   <   Page 3 / 3


Most Recent Comments
Wnderer
 
David Ashton
 
mikehibbett
 
dwhess
 
David Ashton
 
LarryM99
 
David Ashton
 
mikehibbett
 
goafrit
Flash Poll
Top Comments of the Week
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Saddleback Sale – It's Happy Dance Time
Max Maxfield
Post a comment
It's no secret that I'm a huge fan of the products from Saddleback Leather. As I sit here at my desk, I'm wearing one of their 1¾" wide Tow Belts, upon which rests one of their Belt ...

Engineering Investigations

Air Conditioner Falls From Window, Still Works
Engineering Investigations
Post a comment
It's autumn in New England. The leaves are turning to red, orange, and gold, my roses are in their second bloom, and it's time to remove the air conditioner from the window. On September ...

David Blaza

The Other Tesla
David Blaza
5 comments
I find myself going to Kickstarter and Indiegogo on a regular basis these days because they have become real innovation marketplaces. As far as I'm concerned, this is where a lot of cool ...

Larry Desjardin

Engineers Should Study Finance: 5 Reasons Why
Larry Desjardin
47 comments
I'm a big proponent of engineers learning financial basics. Why? Because engineers are making decisions all the time, in multiple ways. Having a good financial understanding guides these ...