Breaking News
Comments
antedeluvian
User Rank
Blogger
Bad Memory
antedeluvian   8/29/2014 9:13:38 AM
NO RATINGS
Wow. 0 for 4. My memory must be defective. I recall several others that didn't make the list, but maybe you should take it with a pinch of salt given my test results.

1. Biomation logic analysers (I still have one)

2. Non Linear Systems (NLS) (I have a DMM)

3. Continental Specialities Corporation (I have a frequency counter and Proto-Board)

4. Leader- It looks like they sell Rigol (I have a scope)

5. I recall a company that started making logic analysers based on a Popular Electronics article. I recall the name Paratronics, but can't find anything on the web, but I did find the PE article.

6. I think Kontron and also Gould had some early logic analysers. Actually I just searched and it looks like Gould acquired Biomation.

7. There must have been several companies that made logic probes. Mine seems to have disappeared in a recent move. Does anybody still use logic probes?

8. Philips (the Dutch conglomerate) made 'scopes for a while. I think the division was bought by Fluke.

9. There was an English 'scope manufacturer called Telequipment bought out by Tektronix in the 1970s IIRC.

10. Whatever happened to Marconi Instruments?

 

 

mhrackin
User Rank
CEO
Re: Bad Memory
mhrackin   8/29/2014 10:44:24 AM
NO RATINGS
I didn't even try!  I didn't recognize most of the "aquired" company names.  There's a whole treasure trove of RF test gear folks that weren't mentioned (Wavetek had a full line of RF generators),  Boonton Electronics springs to mind; way back in the Stone Age when I worked for Motorola Comm Division, Motorola had Boonton make a private-label specialized VHF/UHF RF generator (that the Big M sold to authrized servoce centers, etc.).  I think they were later acquired by either HP or Marconi.  Another great company not mentioned was General Radio!  Thye made everything from measurement bridges to RF generators, calibration standards, etc. They are now part of IET (whatever that is...).

I have a "Tektronix" labeled Telequipment scope that I got around 1990; the company I worked for at the time was acquired, and our (manual) assembly operations were shut down.  I bough several work benches and the 'scope for $50.  All still inhabit my basement workshop to this day.  I did have the scope overhauled and calibrated in late '90s (for $150 including 2-way shipping).  I recently bought some scope probes from MCM Electronics (another division of the same company that owns Newark/Element14).  They are quite nice, especially for the price!

Re Popular Electronics: I started reading it in 1954 (I think they had just started up) and subscribed until their demise.  I had them all until some years back when I ran out of bookshelf space for PE and QST (I'm a Life Member of ARRL).  I still have all of the QSTs, and was overjoyed when ARRL went digital at the same time I squeezed in the last print issue!

antedeluvian
User Rank
Blogger
Re: Bad Memory
antedeluvian   8/29/2014 10:52:28 AM
NO RATINGS
Mark

Boonton Electronics springs to mind;

Boonton came to my mind as well, but is seems they are still in business as part of Wireless Telecom Group

(Wavetek had a full line of RF generators),

As part of my benchtop of instruments from companies that no longer exist, I also have a 50MHz Wavetek Function Generator

 

mhrackin
User Rank
CEO
Re: Bad Memory
mhrackin   8/29/2014 11:35:53 AM
NO RATINGS
Wavetek also made "real" RF generators (AM/FM) along with their better-known function gens.  BTW, I suspect we will see TONS of stuff from all these companies next year at the Hamvention boneyard!  We'll have to take notes and update this blog afterwards.  It seems most of these comapnies have been thriough multiple acquisitions, spin-offs, and mergers resulting in the T&M conglomerates like Danaher.

David Ashton
User Rank
Blogger
Re: Bad Memory
David Ashton   8/29/2014 8:01:56 PM
NO RATINGS
@mhrackin...Wavetek RF generators...we had one in the radio workshop where I worked as a young man (MANY years ago :-)  One of the other techs commandeered it but I got to use it occasionally and it was a fine generator - thumbwheel setting of the frequency, so synthesised obviously.  .  The rest of us had Marconi TF995s - manual dial tuning, and a separate frequency counter).  I also have a Meterman DMM - they are something to do with Wavetek it would seem, but I cannot figure out who got who...

bk11
User Rank
Manager
Re: Bad Memory
bk11   9/2/2014 8:47:32 AM
NO RATINGS
I also have a Meterman DMM - they are something to do with Wavetek it would seem, but I cannot figure out who got who...

Meterman was part of WWG when I worked there, but I believe was sold to Fluke after they became Acterna.  The telecom bust of 2000 wasn't kind to Acterna, and many of us were freed to pursue other opportunities.

MeasurementBlues
User Rank
Blogger
Re: Bad Memory
MeasurementBlues   9/2/2014 9:51:48 AM
NO RATINGS
bk11,

Wavetek's calibration and meters went to Fluke and the Communications products became Acterna through WWG.

MeasurementBlues
User Rank
Blogger
Re: Bad Memory
MeasurementBlues   9/2/2014 9:56:17 AM
NO RATINGS
Antedeluvian,

Yes, Boonton and several other companies became Wireless Telecom Group. I once visited Boonton,based in New Jersey (1997 or 1998). Worst visit I had with a company. They kept me waiting for an hour, then all they did was complain about advertising, which was never part of my job as an editor.

mhrackin
User Rank
CEO
Re: Bad Memory
mhrackin   9/2/2014 10:03:07 AM
NO RATINGS
MB: When I first saw the lead-in to your post, I wondered if your "worst visit" had more to do with NJ than the company!  As one who escaped from NJ as soon as I could (after completion of BSEE), I was concerned....  I have always suspected "Boonton" was the source of the expression "the boonies."  Back in the '50s to early '60s, it was 95% farms, the rest Boonton Electronics and ex-urbanites.

David Ashton
User Rank
Blogger
Re: Bad Memory
David Ashton   8/29/2014 7:43:44 PM
NO RATINGS
@Antedeluvian... "Wow. 0 for 4. My memory must be defective"

Well, you're in good company!  it's called advancing age and decrepitude I think :-)

You mentioned:

2. Non Linear Systems.  By coincidence I was stripping an old utility meter test bench (probably 20 years old +) and came across one of their Digital Panel meters. To my amazement they are still going AND the DPM I got is still produced AND they sent me a manual for it. How good is that?  Great company.

3. Continental Specialities Corporation.  I too have some of their breadboards.  They seem defunct, though there is a Global Specialities which also does breadboards....maybe a successor?  It does not have anything in the company profile...

9. There was an English 'scope manufacturer called Telequipment.  We still have one of their scopes knocking around in our workshop.  Never been used in the 12 years I've been there, though I've had my eye on it (it's better than what I have at home :-)  - I suppose that should be  :-((  Can't find what happened to them (not quickly anyway).

10. Whatever happened to Marconi Instruments?  When I started as a radio tech I had a Marconi TF995 Generator on my bench.  Wikipedia says "Marconi Instruments was sold to IFR Systems Inc. in 1998, itself acquired by Aeroflex in 2002."  So there you go.

mhrackin
User Rank
CEO
Re: Bad Memory
mhrackin   9/2/2014 9:57:25 AM
NO RATINGS
The Tek scope i have is a T935; from the looks of it, it was either a relabeled Telequipment or the next-gen design/refresh by Tek following the full merger.  It's a pretty good GP scope for my uses, especially considering it was virtually free!

Wnderer
User Rank
CEO
Danaher
Wnderer   8/29/2014 10:03:47 AM
NO RATINGS
Danaher owns Tektronix. Danaher test and measurement division owns

    Amprobe
    Arbor Networks
    Fluke
        Comark
        Datapaq
        DH Instruments
        Hart Scientific
        Janos Technology
        Ircon
        Raytek
        Datapaq
    Fluke Networks
        Visual Network Systems Ltd
    Keithley Instruments
    Tektronix
    Tektronix Communications
    VSS Monitoring

This is just a small portion of the companies owned by Danaher.

Electronics companies are started by engineers who understand technology and how to make stuff. The next stage is where they are run by marketing people who know about a market and about customers. The companies end up owned by a bunch of bean counters who don't know how to do anything except make money. They die when the bean counters decide the money is better invested elsewhere.

TonyTib
User Rank
CEO
The Borg, NI, and such
TonyTib   8/29/2014 12:21:45 PM
Doing this all from memory, so it's perfectly accurate....

Let's start with NI:

a. IOTech - acquired by NI, products still sold by NI (on the MCC website, maybe elsewhere).  A midwestern US company that made higher end data acqusition systems (many Ethernet based), although the one I have is from ~15 years ago, is parallel port IIRC, 12-bit, lots of channels, and 1M samples/sec.

b, c, d. Hyperception, Lotus Measure, Signalion - ?

e. Electronics Workbench - acquired by NI, made PCB EDA design and simulation software.  Still available from NI, Mouser & NI will be coming out with a free version.

f. Measurement Computing - acquired by NI, still available (appears to be run as separate division).  Besides their own stuff, MCC started making NI compatible DAQ boards, a sort-of LabView clone (which IIRC was the cause of a law suit); they also produce OEM products (at least, some of Omega's USB DAQ stuff looks EXACTLY like MCC's).  I've used their stuff occasionally over the last 18 years.

g. Metrabyte - I believe acquired by NI.

Two final NI notes:

1. I still remember a French researcher I met who used LabView.  His quote: "NI is very good at maxizing their revenue".

2. I have to give NI credit for keeping most of the products they acquired, unlike say Cognex (bought DVT and dumped the products, although to be fair you can still download the drivers, manuals, etc).


Now, on to THE BORG! (aka Danaher)

Danaher has been very active in the automation space.  Companies acquired include BSA (ball screws and actuators), MEI, Kollmorgen, IDC, and many others I've forgotten.  I'm not a big Danaher fan, and IMHO their track record is mixed: Kollmorgen is pretty sold (pretty lean company, with competitively priced motors and great lead times), but MEI has gone nowhere (they were once very popular), and they basically bought IDC for a couple products and dumped the rest.  Other mini-borgs in automation include Ametek (bought MCG and Pittmann, and totally screwed up the MCG acquisition), Rockwell, and Parker.

On the T&M side, yes, Fluke bought Philip's test equipment; the Fluke Scopemeters have a Philips heritage (my Fluke 196 Scopemeter is even made in Holland).

MeasurementBlues
User Rank
Blogger
Re: The Borg, NI, and such
MeasurementBlues   9/2/2014 9:42:11 AM
NO RATINGS
Fluke also bought Hart Scientific, a maker of high-end calibration equipment, mostly for temperature. Here's an article I wrote about Hart's triple-point water cells.

Calibration: It's what's not in the water that counts

On the T&M side, yes, Fluke bought Philip's test equipment; the Fluke Scopemeters have a Philips heritage (my Fluke 196 Scopemeter is even made in Holland).



MeasurementBlues
User Rank
Blogger
Re: The Borg, NI, and such
MeasurementBlues   9/2/2014 9:46:37 AM
NO RATINGS
Metrabyte was acquired by Keithley, now under Tektronix and the Borg. When keithley bought Metrabyte, several people left to start Computerboards, later changing its make to Measurement Computing. MC came up with a Visual basic Extention called Softwire. It ma yhave been to complete with LabView or it may have benn developed because NI was suing companies with graphical programming tools for T&M. MC was acquired by NI and operates as an NI subsidiary.

g. Metrabyte - I believe acquired by NI.




MeasurementBlues
User Rank
Blogger
Re: The Borg, NI, and such
MeasurementBlues   9/2/2014 10:05:21 AM
NO RATINGS
IOtech: Visited them a couple of times. They were based in Cleveland. IOtech also made GPIB and USB based daq systems. Company was started by TomDeSantis.

My second visit was really awkward and I found out why later. I was whisked into a conference room, seated with my back to the door, then whisked out. The reason was that there were NI people visting at the same time. They were there to talk about acquiring IOtech. The IOtech people knew that I would recognize the NI people and would know something was up. DeSantis left after the NI acquisition. He decided to put the company up for sale and NI came calling.

a. IOTech - acquired by NI, products still sold by NI (on the MCC website, maybe elsewhere).  A midwestern US company that made higher end data acqusition systems (many Ethernet based), although the one I have is from ~15 years ago, is parallel port IIRC, 12-bit, lots of channels, and 1M samples/sec.

MeasurementBlues
User Rank
Blogger
Re: The Borg, NI, and such
MeasurementBlues   9/2/2014 4:06:29 PM
NO RATINGS
Speaking of The Borg

3 Reasons Danaher Corporation's Stock Could Fall


There is no doubt that Danaher Corporation (NYSE: DHR  ) is one of the highest-quality names in the industrial sector, but with the stock underperforming the S&P 500 by around 7.7% year to date, there is a sense that the market is losing a little patience with Danaher. In addition, the company is facing a significant amount of unpredictability about its future prospects -- an unusual situation for Danaher. It's time to look at three reasons Danaher could fall in 2014.

Wnderer
User Rank
CEO
Re: The Borg, NI, and such
Wnderer   9/2/2014 5:20:34 PM
NO RATINGS
@MeasurementBlues --Speaking of The Borg


Interesting article. Do you think test and measurement is in a structural decline?

MeasurementBlues
User Rank
Blogger
Re: The Borg, NI, and such
MeasurementBlues   9/5/2014 12:34:53 PM
NO RATINGS
I wouldn't say that T&M is in decline, but it is a matrure business. That said, there are still startups trying to make a go of it. There are definitely fewer T&M companies than there were 20 years ago.

Sanjib.A
User Rank
CEO
No luck!
Sanjib.A   8/30/2014 9:43:27 PM
NO RATINGS
Failed miserably bad this time...0 in 4...good to learn about the things happened in this space.

antedeluvian
User Rank
Blogger
Beckman Instruments
antedeluvian   9/2/2014 9:03:44 AM
NO RATINGS
I remember Beckman Instruments used to do DMMs (the name suggests even more). A quick google search indicates that the DMMs were bought by Wavetek in 1992- maybe that was the source of the Meterman range.

MeasurementBlues
User Rank
Blogger
Re: Beckman Instruments
MeasurementBlues   9/2/2014 9:50:10 AM
NO RATINGS
Antedeluvian,

I think you're correct about Beckman. When Fluke acquired Wavetek's calibration and instruments products, they had made the Wavetek meter line into Meterman. I still have a Meterman DMM that fits in a shirt pocket.



Most Recent Comments
Ian Johns
 
David Ashton
 
elizabethsimon
 
Anand.Yaligar
 
MeasurementBlues
 
Anand.Yaligar
 
Anand.Yaligar
 
Anand.Yaligar
 
Anand.Yaligar
Flash Poll
Top Comments of the Week
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Vetinari Clock: Additional Possibilities
Max Maxfield
11 comments
In my previous blog on the topic of my Vetinari Clock project, we pondered a number of possibilities for the positioning of switches on the front panel, and we ended up with a number of ...

Jolt Judges and Andrew Binstock

Jolt Awards: The Best Books
Jolt Judges and Andrew Binstock
1 Comment
As we do every year, Dr. Dobb's recognizes the best books of the last 12 months via the Jolt Awards -- our cycle of product awards given out every two months in each of six categories. No ...

Engineering Investigations

Air Conditioner Falls From Window, Still Works
Engineering Investigations
2 comments
It's autumn in New England. The leaves are turning to red, orange, and gold, my roses are in their second bloom, and it's time to remove the air conditioner from the window. On September ...

David Blaza

The Other Tesla
David Blaza
5 comments
I find myself going to Kickstarter and Indiegogo on a regular basis these days because they have become real innovation marketplaces. As far as I'm concerned, this is where a lot of cool ...