Embedded Systems Conference
Breaking News
Newest First | Oldest First | Threaded View
User Rank
Re: Did I miss secure boot as a feature?
DrFPGA   10/17/2014 12:48:25 PM
How about DPA protection? Need to protect against Differential Power Analysis that can 'sniff' out secret keys by looking at power differences during crypto functions... Very common in electronic transaction cards...

asdfs afdsf
User Rank
Re: Did I miss secure boot as a feature?
asdfs afdsf   10/2/2014 2:25:43 PM
This chip supports the following spec which are usually required by a high end set top box:


1. secure boot, all code up to linux kernel and root fs are  protected (RSA2k+sha256)

2. supports OTP keys and various CA key ladders 

3. DDR scrambling

4. JTAG protection


Besides that, it also supports features are not available in today's STB from other SoC vendors .


1. Trustzone TEE, compilant to GP TEE standard

2. 4K w/ Watermark 

3. End to end video protection, even the decompressed video is protected in secure buffer


User Rank
Service providers are being patient
Anand.Yaligar   9/15/2014 10:07:58 AM
"Although 4K content is still limited, and the timing for 4K rollout differs from one operator to another, service providers "are watching the timeline carefully" in order to migrate from 1080p to 2160p. For that reason, Marvell made the new chip "pin compatible" with the company's previous chip, ARMADA 1500 Pro, unveiled earlier this year. Marvell's new ARMADA 1500 Pro 4K SoC features 3840 x 2160 p60 10 bit HEVC video decode capabilities."

It's a good thing that the service providers are waiting for that moment when FHD turns to 4K, because if they have the transition way faster, then if the standards change then their chip lineup designs would have to change too. It may be future-ready, but it cannot cope up with changing standards.

User Rank
Did I miss secure boot as a feature?
DrFPGA   9/11/2014 5:02:42 PM
Maybe it's in the spec someplace. Anyone know if it is supported or if it needs to be added?

User Rank
Re: ARM pushing into performance applications
junko.yoshida   9/11/2014 1:03:21 AM
Both MIPS and PowerPC had ruled the set top box market for years. But I hear some speculation that both Broadcom (MIPS) and ST (own processor) -- two leaders of this market segment -- may be switching to ARM.

User Rank
Re: ARM pushing into performance applications
betajet   9/10/2014 7:15:38 PM
From what I've read over the years, they've been mostly ARM or PowerPC, now pretty much all ARM (I suspect).  Marvell makes a lot of these, based on their ARM family which -- ironically -- they bought from Intel (XScale) who in turn had acquired it from DEC (StrongARM).

There may be some MIPS processors in STBs.

Most x86 processors use too much power for a fanless STB.

The real work of an STB nowadays is video decode, which generally needs to be done in a GPU.  So the CPU is mostly doing networking and control -- it doesn't need x86 performance so use something cheap and cool.


Update: I once used an IBM PPC 401GF which was originally designed for STBs.  Delightful little processor: 32-bit PowerPC in an 80-pin TQFP with multiplexed address/data bus.

User Rank
ARM pushing into performance applications
LarryM99   9/10/2014 6:48:36 PM
I was a little surprised to see an ARM chip being targeted for a high-end STB application. Is that unique to the new generation or am I behind the times? My impression was that previous STB devices tended to use Intel or other architectures. I knew that ARM was making significant advancement into areas like this, but I had not realized that they were mainstream.

Larry M.

Top Comments of the Week
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

March 28 is Arduino Day -- Break Out the Party Hats!
Max Maxfield
Well, here's a bit of a conundrum. I just received an email from my chum David Ashton who hails from the "Unfinished Continent" Down Under. David's message was short and sweet; all he said ...

Bernard Cole

A Book For All Reasons
Bernard Cole
1 Comment
Robert Oshana's recent book "Software Engineering for Embedded Systems (Newnes/Elsevier)," written and edited with Mark Kraeling, is a 'book for all reasons.' At almost 1,200 pages, it ...

Martin Rowe

Leonard Nimoy, We'll Miss you
Martin Rowe
Like many of you, I was saddened to hear the news of Leonard Nimoy's death. His Star Trek character Mr. Spock was an inspiration to many of us who entered technical fields.

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
After a four-year absence, Infineon returns to Mobile World ...
A laptop’s 65-watt adapter can be made 6 times smaller and ...
An industry network should have device and data security at ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
EE Times Senior Technical Editor Martin Rowe will interview EMC engineer Kenneth Wyatt.
Flash Poll