Embedded Systems Conference
Breaking News

Optimizing the Performance of Wideband Zero-IF Receivers

The zero-IF receiver architecture gains popularity in wireless applications because of its suitability to demodulate very wideband RF signals. This capability is important in digital pre-distortion (DPD) transmitters. Realization of sufficient dynamic range is commonly known to be a major issue of zero-IF architectures. DC offsets and second-order intermodulation products are both co-located in frequency with the signal of interest and therewith reduce the receiver sensitivity. Linear Technology’s new LTC®5584 and LTC5585 I/Q demodulators are capable of demodulating RF signals with more than 500MHz bandwidth, while maintain high receiver dynamic range. This is achieved though the unique capability of these demodulators to minimize DC offset and IM2 products in the baseband outputs through simple adjustment of a DC control voltage.
NO RATINGS
6/19/2012 04:19 PM EDT | Post a comment
Related Videos
Linear Technology
LED lighting is an important feature in today’s and future ...
Active balancing of series connected battery stacks exists ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...
Differential op amps are important building blocks in ...
Wireless sensor networks in general have a wide array of ...
11:42
Most Recent Comments
cd2012
 
junko.yoshida
 
MikeD95101
 
betajet
 
junko.yoshida
 
Bill_Higdon
 
Tom_C
 
R_Colin_Johnson
 
David Ashton
Most Recent Messages
5/27/2015
9:18:32 PM
Radio
LATEST ARCHIVED BROADCAST
Overview: Battle-hardened veterans of the electronics industry have heard of the “connected car” so often that they assume it’s a done deal. But do we really know what it takes to get a car connected and what its future entails? Join EE Times editor Junko Yoshida as she moderates a panel of movers and shakers in the connected car business. Executives from Cisco, Siemens and NXP will share ideas, plans and hopes for connected cars and their future. After the first 30 minutes of the radio show, our listeners will have the opportunity to ask questions via live online chat.
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Special Video Section
LED lighting is an important feature in today’s and future ...
Active balancing of series connected battery stacks exists ...
After a four-year absence, Infineon returns to Mobile World ...
A laptop’s 65-watt adapter can be made 6 times smaller and ...
An industry network should have device and data security at ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...