# Measuring a Building's Height With a Barometer

We contemplate a number of ways in which a humble barometer can be used to determine the height of a building, including dropping it off the top and seeing how long it takes to hit the ground.

Do you recall my recent blog about my friend, Don Wilcher, who is a lecturer at the local ITT Technical Institute here in Madison, Ala.? Well, one little tidbit of trivia I neglected to mention is that Don has invited me to give a guest lecture to his students later this month.

It probably won't surprise you to hear that the talk I'm planning to give will leap from topic to topic with the agility of a young mountain goat -- from steam engines in ancient Rome to topics that would make your eyes water, all backed up with a grab-bag of goodies for the students to look at and lay their hands on, like vacuum tubes, relays, and all sorts of other cool "stuff."

Another thing I'm planning on doing is playing one of those old "thinking outside the box" games. In fact, I was contemplating using the "old chestnut problem" that goes, "How can you use a barometer to measure the height of a tall building?"

One slight issue is that I have no clue just how much (or how little) young folks actually know these days. One problem with having a planet's worth of information at their fingertips -- via smartphones and tablets and the Internet -- is that many of our younger brethren don't actually seem to know much at all. (Maybe I'm just becoming jaded -- perhaps everyone says this about the generations that come after them.)

The bottom line is that I will make sure to commence by explaining that atmospheric pressure decreases the higher you go. Next, I will show them a barometer and explain that it is used to measure atmospheric pressure. Only then will I ask them how we might use the barometer to measure the height of a tall building.

I am, of course, expecting them to say that we could measure the atmospheric pressure at the bottom and the top of the building, and then use the difference between these two readings to determine the height of the building.

If they don't suggest this, then I fear all is lost, and we'll move on to talk about other things. But assuming they do suggest this, I will go on to explain that -- unfortunately -- there is an obscure law that forbids the use of barometers in this way, so we are obliged to come up with some other solution.

The idea is to see how many options they can come up with. I'm hoping to have anticipated all of their suggestions and to be able to amaze them with graphics that illustrate their solutions (with equations and everything!). A list of the more obvious options is as follows:

- Measure the height of the barometer and then stand it next to the building when the sun is about 45 degrees in the sky. Measure the lengths of the shadows cast by the barometer and the building and then use a simple ratio to extrapolate the height of the building.
- Drop the barometer off the top of the building, measure how long it takes to hit the ground, and use this value to calculate the height of the building. (I will show the simple formula and then point out that -- in order to increase the precision of our measurement -- we would have to account for things like air resistance etc.)
- Hang the barometer off a long piece of string that is attached to a pole sticking out from the top of the building. Set the length of the string so that the barometer is just raised off the ground. Set the barometer swinging, and use the formula for a simple pendulum to determine the height of the building. This formula is T ~= 2.Pi times the square root of (L/g), where 'T' = the period, 'L' = the length of the string, and 'g' = the local value for gravitational acceleration. So if we measure the period and we know the value of 'g', we can calculate the length of the string 'L' (extra points will be given for the first student to point out that it would be easier to simply measure the length of the string).
- The last option I know is to find the janitor who has worked in the building for years and say: "I will give you this extremely nice barometer if you tell me the height of this building."

So, this is where I need your help. Can you think of any other solutions that the students might come up with? If so, please post them as comments below. I think it's important that we show these young whippersnappers that we've "Been there, done that, read the book, seen the play, purchased the T-shirt, and even got the tattoo!"

**Related posts:**

Author

jmumford913 7/12/2013 12:53:00 PM

Obviously your sarcasm detector was miscalibrated, as I was commenting on the disastrous toxic exposure risks involved in some of the suggestions (dropping it off the building, launching it over the building, etc.)

Consider it recalibrated (your sarcasm detector, not the barometer).

Author

tom-ii 7/12/2013 12:28:56 PM

Author

Max The Magnificent 7/12/2013 10:28:13 AM

I would like to add another...All Good suggestions. Another one I read was to set stand at the bottom of the building holding the barometer -- remotely detonate an explosion at the top of the buliding -- and measure the amount of time it takes the pressuse wave to register on the barometer :-)

Author

Max The Magnificent 7/12/2013 10:25:13 AM

Climb the stairs and mark off the height in barometer-length units.That would work -- this reminds me of the Smoot as a non-standard unit of length.

Author

Max The Magnificent 7/12/2013 10:22:35 AM

Point the laser at the top of the building and measure the angle that the laser/flashlamp is tilted....There are many ways to calculate the height of a building ... the point of this exercise is to use th ebarometer in one way or another.

Author

Max The Magnificent 7/12/2013 10:20:24 AM

then go down to the local building department and pull the blueprints for the building.But that doesn't involve using the barometer, which is a key requirement for the exercise.

Author

docdivakar 7/11/2013 9:40:25 PM

MP Divakar

Author

docdivakar 7/11/2013 9:20:03 PM

http://comsocscv.org/,

Nov 2012: Technologies for Location Determination in Indoor and Urban Environments.

The speaker from NextNav (formerly @Trimble Navigation) does allude to atmospheric pressure measurement as one of the reliable ways (need 10Pa resolution). This can be accomplished by MEMS pressure sensors in a smart phone BUT it needs to be quite precise and must correlate to a reference system.

MP Divakar

Author

n1ist 7/11/2013 8:32:17 PM

Author

_hm 7/11/2013 6:52:34 PM